Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
On a whim, since Ive purchased from them before, and can do local
pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" * * * * * * *mariposa rand mair theal |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
"Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal So, Grasshopper. Tell us what you have learned from this experience. Steve |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
"Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal Look at converting the power supply to constant current instead of constant voltage and use it for anodizing??? |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
It can make a decent electro-anything.
I have a similar one with a slightly smaller range, but 110v. I use it for testing DC motors, running laptops lacking power supplies, and so on. i On 2008-05-26, Gunner Asch wrote: On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" •£Ä •£Ä •£Ä •£Ä •£Ä •£Ä •£Ämariposa rand mair theal -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
By the way,. this jtsele is a real asshole, as evidenced by their
feedback. Leave them some neg i On 2008-05-26, SteveB toquerville wrote: "Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal So, Grasshopper. Tell us what you have learned from this experience. Steve -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Den wrote:
Look at converting the power supply to constant current instead of constant voltage and use it for anodizing??? No need to convert. They are CV/CC designs. Kevin Gallimore ----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.pronews.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= - Total Privacy via Encryption =--- |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Jeez Gunner,
Spot welder... Electro-plater.. ZIP Diver blaster... LOL.. --.- Dave "Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Gunner Asch wrote:
On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? An avionics shop might pay good money for it. Try an ad in Trade-a-Plane. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
On 2008-05-26, Jim Stewart wrote:
Gunner Asch wrote: On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? An avionics shop might pay good money for it. Try an ad in Trade-a-Plane. I think that all avionics shops are well stocked up with this sort of stuff. The power supplies are good, but there is an excess of them. I sold a bunch of PP-1104C/G supplies, of similar kind, they only fetch $150 or so. Ham people like them. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
"Jim Stewart" wrote in message news Gunner Asch wrote: On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 you might try offering the lambda supply to folks who tinker with old radios - particularly battery radios - there is a newsgroup for such folks (search on radio+phono to find it) - the lambda supply is, as I recall, a linear supply and hence very low noise. ** Posted from http://www.teranews.com ** |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
"Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps snip You're building a "Time Machine"! I can tell, I want to go too! Let's go back and slap Cliff's mother for a start. Then we could tell "young me" to do something useful with his life. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Well, if you're into CNC, that PS would run steppers, servos, whatever in
its voltage range. Respectfully, Ron Moore "Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Tom Gardner wrote:
Then we could tell "young me" to do something useful with his life. Yow-boy, what I wouldn't give to be able to go back to about 1971 and give myself a swift kick in the arse and a brief lecture.... Jon |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
"Jon Anderson" wrote in message . .. Tom Gardner wrote: Then we could tell "young me" to do something useful with his life. Yow-boy, what I wouldn't give to be able to go back to about 1971 and give myself a swift kick in the arse and a brief lecture.... Jon but ask yourself this - if you could, would you listen to yourself? ** Posted from http://www.teranews.com ** |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
On Mon, 26 May 2008 02:16:30 -0800, "SteveB"
toquerville,utah@zionvistas wrote: "Gunner Asch" wrote in message .. . On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps Picture didnt show the volt ranges very well, but hoped..hoped that it would be adjustable downwards. Thought it might make a decent electro-deruster. Any suggestions to other uses? Other item I purchased was BECKMAN 7200 DIGITAL CONTROLLER (330234947588) I think,,,think that these are programable temperature controllers, useful for running a heat treating furnace There are (5) in the lot, if anyone wants to purchase one from me. I only need at most (2) Beckman doesnt seem to have the manual available without going through all sorts of bull**** Btw..the seller is good....but there is one catch..they charge handling....Usually for small items...$10 for the "fill the box with foam"..however..I was EXTREMELY ****ed off to be charged $44 for "handling" for the two auction items above, for local pickup. I nearly always leave the foam and box behind when I pick the stuff up. Ive bought a fair amount of stuff from them in the last couple months...with NO break on "handling", which is often far more than what I paid for the item originally. Im having to reevaluate my future puchases from them...... And emailing them is like ****ing into the wind. Calling them is better. When I ask them if they have say...a function generator for sale, they say no, then 2 days later one goes up on auction. selling for less than what Id pay cash... Koreans...shrug. Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" mariposa rand mair theal So, Grasshopper. Tell us what you have learned from this experience. Steve Call, not email them for handling charges before bidding and take that into consideration before making a bid? Koreans are tight asses? Not all good deals are as good as they seem? at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" * * * * * * *mariposa rand mair theal |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
On Mon, 26 May 2008 19:11:35 -0800, Jon Anderson
wrote: Tom Gardner wrote: Then we could tell "young me" to do something useful with his life. Yow-boy, what I wouldn't give to be able to go back to about 1971 and give myself a swift kick in the arse and a brief lecture.... Jon Id go back to 1973 and scream "Incoming" .... Shrug Gunner at yoyodyne they were all veterans of the psychic wars exiled from the eighth dimension where the winds of limbo roar" * * * * * * *mariposa rand mair theal |
#17
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
On Sun, 25 May 2008 23:19:04 -0700, Gunner Asch
wrote: Should work perfectly well for electrolytic de-rusting. Was the final invoice sent via ebay or direct? If direct, report that sale and every one of their other sales to ebay for fee avoidance. Petty vengeance makes the world go round :-) Mark Rand RTFM |
#18
Posted to rec.crafts.metalworking
|
|||
|
|||
Ebay stuff...what do I with with em?
Tough call,,
Either '72 to swig more J.D. with Pig Pen, or '80 and take that job Bill Gates offered me... --.- Dave "Tom Gardner" wrote in message ... "Gunner Asch" wrote in message ... On a whim, since Ive purchased from them before, and can do local pickup...I bid on and won Ebay #s 330235906492 LAMBDA REGULATED POWER SUPPLY LK-361-FMOV This 150lb pig is a 220volt 1ph input power supply, with switched voltages from 6vts to 40vts DC, at up to 60 amps per range with switchable current limiting from 3-60 amps snip You're building a "Time Machine"! I can tell, I want to go too! Let's go back and slap Cliff's mother for a start. Then we could tell "young me" to do something useful with his life. |
#19
Posted to rec.crafts.metalworking
|
|||
|
|||
Wayback Machine Ebay stuff...what do I with with em?
I missed the Staff meeting, but the Memos showed that Jon Anderson
wrote on Mon, 26 May 2008 19:11:35 -0800 in rec.crafts.metalworking : Tom Gardner wrote: Then we could tell "young me" to do something useful with his life. Yow-boy, what I wouldn't give to be able to go back to about 1971 and give myself a swift kick in the arse and a brief lecture.... '69/70, with one of Calvin's Transmogrify Rayguns. Little personality implant (easy enough to do on a high school freshman) and a variation on that lecture ("One word, son,: 'machining'). When the opportunity comes to travel broad, take it! Marry Her, anyway. Arrgh! Youth is wasted on the young! tschus pyotr -- pyotr filipivich "I had just been through hell and must have looked like death warmed over walking into the saloon, because when I asked the bartender whether they served zombies he said, ‘Sure, what'll you have?'" from I Hear America Swinging by Peter DeVries |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ebay Seller stanp2323 Worst Ebay Experience EVER be careful | Woodworking | |||
dbx/ hx pro stuff | Electronics Repair | |||
FS in Alachua/Gainesville FL: huge volume shop stuff, tools supplieshardwares, other "guy stuff", 1, some, or all - PICKUP preferred | Woodworking | |||
tool stuff etc. on ebay | Woodworking |