Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 112
Default tuned exhaust for a lycoming 0320

Thanks for a bunch of ideas. I posted my problem on two other NGs but you
wizards responded more and with some good ideas. This NG is NOT just about
watches, nudes and politics.

Stu


  #2   Report Post  
Posted to rec.crafts.metalworking
* * is offline
external usenet poster
 
Posts: 222
Default tuned exhaust for a lycoming 0320



Stuart & Kathryn Fields wrote in article
...
Thanks for a bunch of ideas. I posted my problem on two other NGs but

you
wizards responded more and with some good ideas. This NG is NOT just

about
watches, nudes and politics.

Stu




No! Metalworking is right up there in fourth place.


  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 561
Default tuned exhaust for a lycoming 0320

On May 23, 10:16 am, "Stuart & Kathryn Fields"
wrote:
Thanks for a bunch of ideas. I posted my problem on two other NGs but you
wizards responded more and with some good ideas. This NG is NOT just about
watches, nudes and politics.

Stu




I'm selling watches with a nude picture of Hillary.


Dave
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 112
Default tuned exhaust for a lycoming 0320


"John R. Carroll" wrote in message
...
wrote:
On May 23, 10:16 am, "Stuart & Kathryn Fields"
wrote:
Thanks for a bunch of ideas. I posted my problem on two other NGs
but you wizards responded more and with some good ideas. This NG is
NOT just about watches, nudes and politics.

Stu




I'm selling watches with a nude picture of Hillary.


Please ship at least one blindfold with each.



--

John R. Carroll
www.machiningsolution.com


Note: Blindfolds no longer available. They were all bought up by a lot of
voters.

Stu




  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,562
Default tuned exhaust for a lycoming 0320

wrote:

I'm selling watches with a nude picture of Hillary.


Anyone buying them?

Wes
  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,154
Default tuned exhaust for a lycoming 0320

On Tue, 27 May 2008 19:40:26 -0400, with neither quill nor qualm,
Spehro Pefhany quickly quoth:

On Wed, 28 May 2008 19:21:01 -0400, John Husvar
wrote:

In article
,
wrote:
I'm selling watches with a nude picture of Hillary.


Dave


ARRGH, the visual! Make it stop! Make it stop! Make it a stopwatch!

Just reading that is painful!


What do you have against Ms. Duff?

http://upload.wikimedia.org/wikipedi..._Shankbone.jpg


Nothing. That little girl is ripening up NICELY, isn't she?

It's _this_ one he's complaining about (no nudes were harmed in the
making of these urls): http://tinyurl.com/6q5esl ,
http://tinyurl.com/22xy54 .

--
I wish the Department of Homeland Security knew what
ol' Unca Doug did, instinctively, so many years ago:

There is no security on this earth, there is only opportunity.
-- General Douglas MacArthur
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
tuned exhaust for a Lycoming 0320 Stuart & Kathryn Fields Metalworking 20 May 25th 08 09:56 PM
AR Stereo Receiver Center-Tuned Meter [email protected] Electronics Repair 7 April 3rd 07 03:57 PM
slug-tuned coils or substitutes? [email protected] Electronics Repair 6 September 13th 06 03:36 PM
Picture not bright enough when tuned to a station. alitonto Electronics Repair 1 December 18th 05 03:16 PM
tuned sow's ear Dan Cullimore Woodworking 2 December 1st 04 06:19 PM


All times are GMT +1. The time now is 06:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"