 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
HSS vs Coated Tooling RPMs
If a HSS bit can run at 1200 RPM, can coated TiN run at 1800 on average?
Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com V8013-R |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
HSS vs Coated Tooling RPMs
Have to run, but try this page of the MSC big book:
http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=633 Pete Stanaitis ------------------------ Joe AutoDrill wrote: If a HSS bit can run at 1200 RPM, can coated TiN run at 1800 on average? Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com V8013-R |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| vinyl coated vs. pvc coated aluminum | Home Repair | |||
| Genset RPMs | Home Repair | |||
| The Turning Dilema - RPMs vs Risk (semi-long) | Woodturning | |||
| Proper RPMs for Snow Blower Engine? | Metalworking | |||
| Snow Blower engine RPMs? | Home Repair | |||
Linear Mode
