Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 75
Default OT - Computer software question...

Al A. wrote:
Apologies for the OT post, but i know we have some pretty experienced
computer types here whose judgment I'd trust. I may have need for some
means to remotely access, via the web, a couple of computers. All have
capability for "Always on" broadband access. Let's call them computers
A,B & C. We need to be able to use computer A to access either B or C
remotely, just to transfer and access files and such. There should never
be need to access B & C simultaneously. Needs to be reasonably secure,
but no overly sensitive personal, financial or DOD type info here.

Someone suggested PC ANYWHERE as a possible app to do this. I have
researched it a bit and it looks like it may be what I need. I am
wondering if any of you guys have tried this particular software and
have an opinion on ease of setup/use, relaibility, etc., or care to
suggest something else.

I consider myself a bit more computer savvy than the average joe, but I
have no delusions that I am a network expert. I would appreciate any
suggestions.

Thanks very much,
AL A.



Check out any VNC (Virtual Network Computing) software. To find out a
bit more about VNC read: http://en.wikipedia.org/wiki/VNC

Plenty of freeware available. Stable computing platform.

Available for PC and Mac.

I can access and operate my computer from anywhere in the world from my
Palm TX, as well as from my iPhone, using VNC software.

--
Abrasha
http://www.abrasha.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - Computer software question... clare at snyder dot ontario dot canada Metalworking 1 March 15th 08 03:28 AM
OT - Computer software question... Wes[_2_] Metalworking 4 March 14th 08 08:15 PM
OT - Computer software question... Ignoramus17007 Metalworking 0 March 14th 08 03:31 AM
OT - Computer software question... Richard J Kinch Metalworking 0 March 14th 08 03:11 AM
OT - Computer software question... Steve Walker Metalworking 0 March 14th 08 03:05 AM


All times are GMT +1. The time now is 10:19 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"