|
Rec Crafts Politics
Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill |
Rec Crafts Politics
Buh-bye! On Tue, 11 Mar 2008 19:52:00 -0500, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill |
Rec Crafts Politics
On 2008-03-12, Bill wrote:
Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. i |
Rec Crafts Politics
"Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress |
Rec Crafts Politics
"Ed Huntress" wrote in message ... "Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress I want to know how to put a wench in MY truck!!! |
Rec Crafts Politics
On Tue, 11 Mar 2008 19:52:00 -0500, Bill
wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill Don't let the door hit you etc. etc. etc. Gerry :-)} London, Canada |
Rec Crafts Politics
"Ed Huntress" wrote in message ... "Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress That kinds of sums up the problem with this NG. Martin -- martindot herewhybrowat herentlworlddot herecom |
Rec Crafts Politics
On Tue, 11 Mar 2008 20:16:52 -0500, with neither quill nor qualm,
Ignoramus11215 quickly quoth: On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. Yeah, but we can't talk about it on R.C.Politics, can we? Yeah, Gunner, the mill is finally out of my pickup bed. -- It's a shallow life that doesn't give a person a few scars. -- Garrison Keillor |
Rec Crafts Politics
On Tue, 11 Mar 2008 21:41:04 -0400, with neither quill nor qualm, "Tom
Gardner" quickly quoth: I want to know how to put a wench in MY truck!!! Just drive down any road in your town and hooker in, Tawm. -- It's a shallow life that doesn't give a person a few scars. -- Garrison Keillor |
Rec Crafts Politics
Bill wrote:
Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill Put our doorknob back, before you leave. Ron is still chewing the chrome off of it. -- My sig file can beat up your sig file! |
Rec Crafts Politics
"Bill" wrote in message m... Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There sure are. Most of them a pretty boring. RCM is like a lively cantina: lots of noise, dozens of dime-store cowboys, one or two people who really know what is cookin' in the kitchen. -Carl (stay away from the chicken enchildas) |
Rec Crafts Politics
"Tom Gardner" wrote in message ... "Ed Huntress" wrote in message ... "Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress I want to know how to put a wench in MY truck!!! I always keep a can of Liquid Wench handy for road emergencies. -- Ed Huntress |
Rec Crafts Politics
"Martin Whybrow" wrote in message ... "Ed Huntress" wrote in message ... "Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress That kinds of sums up the problem with this NG. Martin Too many trucks? d8-) I don't drive 'em. I don't wear peacock-skin cowboy boots, either. 'Not interested. -- Ed Huntress |
Rec Crafts Politics
"Ed Huntress" wrote in message ... Too many trucks? d8-) I don't drive 'em. I don't wear peacock-skin cowboy boots, either. 'Not interested. -- Ed Huntress How do you bring stuff home from the dump? -Carl |
Rec Crafts Politics
Bill wrote:
Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill Well go there and quit bothering us. There are serious matters at hand that must be addressed if we what this country to be one what we want to do metal working in. Did you expect this to be your Andy Warhol moment where we all say, "Please don't go, you are so famous"? Bye Wes PS The door closer is a spring (metal content) it closes fast so don't let it hit your ass on the way out the door. |
Rec Crafts Politics
"Carl Byrns" wrote in message news:46PBj.7622$y83.5693@trndny06... "Ed Huntress" wrote in message ... Too many trucks? d8-) I don't drive 'em. I don't wear peacock-skin cowboy boots, either. 'Not interested. -- Ed Huntress How do you bring stuff home from the dump? -Carl Ha-ha! That's something I don't do. -- Ed Huntress |
Rec Crafts Politics
On Tue, 11 Mar 2008 19:52:00 -0500, Bill
wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill So you were going to use telepathy to get a response to your unanswered questions? Ive been here a few years...10 or more, and Ive never seen an intelligent question go unanswered, and often turn into a very interesting thread. Yet you **** and moan about non metalworking stuff, when you dont even ask any questions? Can you actually walk and chew gum at the same time? Gunner\ |
Rec Crafts Politics
On Tue, 11 Mar 2008 19:52:48 -0700, Larry Jaques
wrote: On Tue, 11 Mar 2008 20:16:52 -0500, with neither quill nor qualm, Ignoramus11215 quickly quoth: On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. Yeah, but we can't talk about it on R.C.Politics, can we? Yeah, Gunner, the mill is finally out of my pickup bed. Now what are you doing to use for balast? Gunner |
Rec Crafts Politics
"Bill" wrote in message m... Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill When you find such a place, will you please make one more post and tell us where this fabled newsgroup can be found? We got what you need here, you just have to wade through the weeds. Steve |
Rec Crafts Politics
"Tom Gardner" wrote in message ... "Ed Huntress" wrote in message ... "Ignoramus11215" wrote in message ... On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. And a lot of us who couldn't care less, certainly a lot less than about the politics that are driving trade and the status of US manufacturing, and that of other countries around the world. But we don't object to truck threads. However, there are several truck NGs where Bill may feel more at home. -- Ed Huntress I want to know how to put a wench in MY truck!!! Do you want Eliot's phone number? They're expensive. Steve |
Rec Crafts Politics
On Wed, 12 Mar 2008 08:37:10 -0700, Gunner
wrote: On Tue, 11 Mar 2008 19:52:00 -0500, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. Bill So you were going to use telepathy to get a response to your unanswered questions? Ive been here a few years...10 or more, and Ive never seen an intelligent question go unanswered, and often turn into a very interesting thread. Yet you **** and moan about non metalworking stuff, when you dont even ask any questions? Can you actually walk and chew gum at the same time? Gunner\ Its a lot of years since I worked in a shop but as I remember it the subject of conversation while you were waiting for the machine to finish a cut was (1) Jesus, did you see that sweet thing that just walked by?, (2) The boss is a prick! and (3) Who are you going to vote for? Just like here. Bruce-in-Bangkok (correct email address for reply) |
Rec Crafts Politics
On Wed, 12 Mar 2008 08:37:52 -0700, with neither quill nor qualm,
Gunner quickly quoth: On Tue, 11 Mar 2008 19:52:48 -0700, Larry Jaques wrote: On Tue, 11 Mar 2008 20:16:52 -0500, with neither quill nor qualm, Ignoramus11215 quickly quoth: On 2008-03-12, Bill wrote: Since the NG has been taken over by people who have no clue that it is supposed to be RCM not RCP I shall no longer waste my time parsing through crap to find a few metalworking related messages. I was going to ask some questions about a winch truck rigup that I am working on but there are other places on the net that dont have such a high amount of politics crap. There are quite a few people here who put winches on their trucks and trailers. Yeah, but we can't talk about it on R.C.Politics, can we? Yeah, Gunner, the mill is finally out of my pickup bed. Now what are you doing to use for balast? I'm selling that truck. I have the nice new Tundra now. Some GDMFASOB in a parking lot nailed my driver door the other day while I was away from it, too. 1" x 1/8" scratch through the brand effin' new paint... Well, it's christened now. My ladder in the bed and the door. Now all I have to do is christen the inside, in the reclining seats. My old girlfriend wasn't up to it, damnit, but she liked the truck a lot. -- It's a shallow life that doesn't give a person a few scars. -- Garrison Keillor |
Rec Crafts Politics
"Ed Huntress" wrote in message ... "Carl Byrns" wrote in message news:46PBj.7622$y83.5693@trndny06... "Ed Huntress" wrote in message ... Too many trucks? d8-) I don't drive 'em. I don't wear peacock-skin cowboy boots, either. 'Not interested. -- Ed Huntress How do you bring stuff home from the dump? -Carl Ha-ha! That's something I don't do. -- Ed Huntress You must a flatlander from downstate. -Carl (hill folk from upstate) |
Rec Crafts Politics
"Carl Byrns" wrote in message news:ZE1Cj.10050$iD2.8357@trndny09... "Ed Huntress" wrote in message ... "Carl Byrns" wrote in message news:46PBj.7622$y83.5693@trndny06... "Ed Huntress" wrote in message ... Too many trucks? d8-) I don't drive 'em. I don't wear peacock-skin cowboy boots, either. 'Not interested. -- Ed Huntress How do you bring stuff home from the dump? -Carl Ha-ha! That's something I don't do. -- Ed Huntress You must a flatlander from downstate. -Carl (hill folk from upstate) I'm a flatlander in NJ. If I had the time to go scrounge for things in the dump, I'd spend it fishing instead. I last scrounged a dump when I was about 10 years old. If I felt like digging in crud, I'd work on my garden. Which reminds me -- Joe Autodrill will be envious -- it's time to start my Rutgers Ramapo tomatoes, the berry that made New Jersey famous. (I'll bet you thought Ramapos were long gone, eh, Joe? I have an inside line on the seeds.) -- Ed Huntress |
Rec Crafts Politics
Carl Byrns wrote:
There sure are. Most of them a pretty boring. RCM is like a lively cantina: lots of noise, dozens of dime-store cowboys, one or two people who really know what is cookin' in the kitchen. -Carl (stay away from the chicken enchildas) True. They use 'union' chickens. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
Rec Crafts Politics
Ed Huntress wrote:
(I'll bet you thought Ramapos were long gone, eh, Joe? I have an inside line on the seeds.) You really should help him out. http://www.njfarmfresh.rutgers.edu/d...oorderform.pdf Kevin Gallimore ----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.pronews.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= - Total Privacy via Encryption =--- |
| All times are GMT +1. The time now is 08:19 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter