actually metal working related - paint type and color
I am replacing my old taiwan drill press with a 17 inch rockwell delta
unit - one of the old ones - I got one, and it had some bad parts - so I now have four heads - and I'm busy taking them apart and cleaning them up enough to put all the best stuff into one drill press - I've been bead blasting or stripping the castings one way or another, painting with an etching primer - that leaves a finish coat I know I always recommend Imron, but I can't get it any more and the Imron I have left is black and I don't want a black drill press - I want a nice modern pale green color, I think - so the question is - urethane? lacquer? acrylic? two part epoxy? catalyzed acrylic? I have a finishmaster automotive paint store nearby - I can get a pint of paint with some catalyst for $30 or so - I don't mind using expensive materials because I really really really hate doing stuff over - so, what do you-all think? -- bill to email me, to to my web page, www.wbnoble.com and find my email or unscramble the following by removing spaces and correcting the obvious spelling errors wil lia m_b_n obl e at msn daught com -- Posted via a free Usenet account from http://www.teranews.com |
actually metal working related - paint type and color
On Tue, 19 Feb 2008 23:42:55 -0800, "William Noble"
wrote: I am replacing my old taiwan drill press with a 17 inch rockwell delta unit - one of the old ones - I got one, and it had some bad parts - so I now have four heads - and I'm busy taking them apart and cleaning them up enough to put all the best stuff into one drill press - I've been bead blasting or stripping the castings one way or another, painting with an etching primer - that leaves a finish coat I know I always recommend Imron, but I can't get it any more and the Imron I have left is black and I don't want a black drill press - I want a nice modern pale green color, I think - so the question is - urethane? lacquer? acrylic? two part epoxy? catalyzed acrylic? I have a finishmaster automotive paint store nearby - I can get a pint of paint with some catalyst for $30 or so - I don't mind using expensive materials because I really really really hate doing stuff over - so, what do you-all think? I use Rustoleum industrial, usually Smoke Gray, and it holds up just fine. Ive also used the Sherwin Williams CENTURIOn Water-based Urethane with good results on machine tools Gunner -- bill to email me, to to my web page, www.wbnoble.com and find my email or unscramble the following by removing spaces and correcting the obvious spelling errors wil lia m_b_n obl e at msn daught com |
All times are GMT +1. The time now is 04:56 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter