Teachable Coolant Nozzle...SpiderCool!
As a service tech out in the field I came across this machine option
at the East-tec trade show. It's a teachable coolant nozzle system that memorizes the precise location you want coolant aimed for 99 tools. It also has the ability to set two points on the same tool to provide a sweeping action...resulting in superior chip-evacuation. Increased "up-time", increase tool-life, faster feedrates, better "lights-out" performance, and ease of operation. Can be added to any fully-enclosed VMC or CNC Lathe. Increase productivity on old machine instead of buying a new one! At $1,995 it's a "no-brainer" It pays for itself with a few months.Too much to tell...for more info visit http://productionpal.googlepages.com/home |
Teachable Coolant Nozzle...SpiderCool!
wrote: As a service tech out in the field I came across this machine option at the East-tec trade show. (clip) ^^^^^^^^^^^^^^^^^^^^^^ Yes, and how did you "come across" it? By being at work in the booth where they were being sold? |
Teachable Coolant Nozzle...SpiderCool!
"Leo Lichtman" wrote in message ... wrote: As a service tech out in the field I came across this machine option at the East-tec trade show. (clip) ^^^^^^^^^^^^^^^^^^^^^^ Yes, and how did you "come across" it? By being at work in the booth where they were being sold? Cynic. g -- Ed Huntress |
Teachable Coolant Nozzle...SpiderCool!
wrote in message ... As a service tech out in the field I came across this machine option at the East-tec trade show. It's a teachable coolant nozzle system that memorizes the precise location you want coolant aimed for 99 tools. It also has the ability to set two points on the same tool to provide a sweeping action...resulting in superior chip-evacuation. Increased "up-time", increase tool-life, faster feedrates, better "lights-out" performance, and ease of operation. Can be added to any fully-enclosed VMC or CNC Lathe. Increase productivity on old machine instead of buying a new one! At $1,995 it's a "no-brainer" It pays for itself with a few months.Too much to tell...for more info visit http://productionpal.googlepages.com/home Ya know what? I don't mind someone coming in here and touting his or her own product...OCCASIONALLY ANYWAY!!!...but don't think we're fools and won't figure it out. Go ahead and tell us that you work there...if nothing else, your return address just HAPPENS to be the same as the place you "found" at East-Tec would be a tip-off. sheesh Mike |
Teachable Coolant Nozzle...SpiderCool!
"Leo Lichtman" wrote:
wrote: As a service tech out in the field I came across this machine option at the East-tec trade show. (clip) ^^^^^^^^^^^^^^^^^^^^^^ Yes, and how did you "come across" it? By being at work in the booth where they were being sold? Unless I'm mistaken, my employers ancient Haas VF1 has a programable coolant nozzle. Nothing new. Wes |
Teachable Coolant Nozzle...SpiderCool!
On Feb 17, 9:28*am, Wes wrote:
"Leo Lichtman" wrote: wrote: * As a service tech out in the field I came across this machine option at the East-tec trade show. (clip) ^^^^^^^^^^^^^^^^^^^^^^ Yes, and how did you "come across" it? *By being at work in the booth where they were being sold? Unless I'm mistaken, my employers ancient Haas VF1 has a programable coolant nozzle. *Nothing new. Wes The only difference being that SpiderCool is not tied into the control/ programming, and has a patented two-position sweeping feature that provides superior chip-evac. Another small advantage is that you don't have to buy an entire HAAS machine to get one. It can be added to any existing(fully-enclosed) Vert/Horiz Mill. The money earned/saved through increased spindle "Up-Time" and prolonged tool-life pays for itself within a few months, not to mention the happiness it brings a good machinist(who you might want to keep around). I have to wonder why a company would go out and buy a new machine for better shop productivity before they attempted to get every machining center they already owned as efficient as it could be with a SpiderCool...$2k per machine...shops burn up more in tooling due to poor coolant delivery situations. I became a rep because I belive in the benefits of this product and think it will slowly become popular...like the wheel eventually did. LOL! I realize this option is considered a luxury for now...but some leading edge companies have already took the plunge! Major Corporations Using SpiderCool: Accellent Orthopaedics Barden Corporation California Edison Curtiss Wright General Electric Aircraft Gillette Honda Transmissions IBM Corporation Lockheed Martin National Institute of Health Parker Hannifin Corporation Pratt & Whitney Aircraft Schick-Wilkinson Sword Sikorsky Aircraft Toro Corporation Tyco Electronics Westinghouse Corporation http://productionpal.googlepages.com/home |
All times are GMT +1. The time now is 06:12 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter