midwinter EDR with a 10 amp battery charger
 

I am fond of electrolytic derusting. I do it a lot. I have collected a bunch
of little tricks I use but this one is good enough to write up and share. Like
lots of home shop guys, I use an inexpensive car battery charger. Mine is made
by Schumacher, and has only one control, a toggle between 6 and 12 volts. It
does have an ammeter. It's a 10 amp battery charger with overtemp protection.
What happens when I go overcurrent for very long is a relay clicks and then
I have to wait a bit for the thing to cool down and start over.

What I have found that in midwinter, outdoors but under the eave of my shop
front overhang, in 20-30F temperatures, I can run it at nearly 18 amps for
several days in a row now without its overcurrent relay popping and without
the charger seeming to even get warm.

Well, now that I've written it this trick seems dead obvious, but believe me
it wasn't to me before I learned it! :-)

Grant Erwin
Kirkland, Washington

--
Posted via a free Usenet account from http://www.teranews.com

midwinter EDR with a 10 amp battery charger
 

On Jan 27, 11:45*am, Grant Erwin wrote:
I am fond of electrolytic derusting. I do it a lot. I have collected a bunch
of little tricks I use but this one is good enough to write up and share. Like
lots of home shop guys, I use an inexpensive car battery charger. Mine is made
by Schumacher, and has only one control, a toggle between 6 and 12 volts. It
does have an ammeter. It's a 10 amp battery charger with overtemp protection.
What happens when I go overcurrent for very long is a relay clicks and then
I have to wait a bit for the thing to cool down and start over.

What I have found that in midwinter, outdoors but under the eave of my shop
front overhang, in 20-30F temperatures, I can run it at nearly 18 amps for
several days in a row now without its overcurrent relay popping and without
the charger seeming to even get warm.

Well, now that I've written it this trick seems dead obvious, but believe me
it wasn't to me before I learned it! :-)

Grant Erwin
Kirkland, Washington

--
Posted via a free Usenet account fromhttp://www.teranews.com

If the unit does not have a cooling fan you can obtain one from nearly
any junk computer or computer power supply.

midwinter EDR with a 10 amp battery charger
 

On Jan 27, 10:45 am, Grant Erwin wrote:
I am fond of electrolytic derusting. I do it a lot. I have collected a bunch
of little tricks I use but this one is good enough to write up and share. Like
lots of home shop guys, I use an inexpensive car battery charger. Mine is made
by Schumacher, and has only one control, a toggle between 6 and 12 volts. It
does have an ammeter. It's a 10 amp battery charger with overtemp protection.
What happens when I go overcurrent for very long is a relay clicks and then
I have to wait a bit for the thing to cool down and start over.

What I have found that in midwinter, outdoors but under the eave of my shop
front overhang, in 20-30F temperatures, I can run it at nearly 18 amps for
several days in a row now without its overcurrent relay popping and without
the charger seeming to even get warm.

Well, now that I've written it this trick seems dead obvious, but believe me
it wasn't to me before I learned it! :-)

Grant Erwin
Kirkland, Washington

--
Posted via a free Usenet account fromhttp://www.teranews.com

I do alot of it as well, but I gave up on using a battery charger.
Never could get the current out of it that I wanted. One or two amps
was the max. I now use a bigger adjustable bench power supply, 40VDC
and 25ADC and love it. It's big and heavy, probably 75#. It's mounted
on a roll around rack so it's easy to drag out and use. Has storage
for my buckets and anodes under the power supply and associated wires.
With enough volts/amps, I can almost make the bath boil with bubbles!

midwinter EDR with a 10 amp battery charger
 

On Jan 27, 11:45*am, Grant Erwin wrote:
..., I use an inexpensive car battery charger. Mine is made
by Schumacher, and has only one control, a toggle between 6 and 12 volts. It
does have an ammeter. It's a 10 amp battery charger with overtemp protection.
...
Grant Erwin

I added a surplus 3 Amp Variac to a similar Schauer charger to make a
variable power supply. The transformer will stand the 140V input,
giving 18V out which can salvage a lead-acid battery with a high-
impedance cell.

Jim Wilkins

midwinter EDR with a 10 amp battery charger
 

Grant Erwin wrote:
I am fond of electrolytic derusting. I do it a lot. I have collected a
bunch
of little tricks

Grant, will EDR remove gun bluing along with the rust?