Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 152
Default Clausing 1300 manual

Does anyone have a scanned copy of an operators manual or repair/parts
manual or for a Clausing 1300 13" x 36"? I'm picking up a 1300 this
weekend, at good price I think, but condition is somewhat unknown as
it could not be powered up. It's missing the gear/belt cover and the
chip pan, and maybe other parts so I will be looking to find a source
for used parts. Probably could make do for now with just a copy of the
parts breakdown page(s).
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,600
Default Clausing 1300 manual

On 2007-11-29, oldjag wrote:
Does anyone have a scanned copy of an operators manual or repair/parts
manual or for a Clausing 1300 13" x 36"? I'm picking up a 1300 this
weekend, at good price I think, but condition is somewhat unknown as
it could not be powered up. It's missing the gear/belt cover and the
chip pan, and maybe other parts so I will be looking to find a source
for used parts. Probably could make do for now with just a copy of the
parts breakdown page(s).


I don't have that one.

But Clausing Service Center will happily sell you a photocopy
matched to your machine's model number and serial number for a quite
reasonable price.

Their phone number (as of 2005) was: 1 (574) 533-0371

And they will include a price list for parts still available for
the machine, should you discover that you need some.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
anyone need a manual for a Clausing 10 inch lathe, serial 401710 to 103160? William B Noble (don't reply to this address) Metalworking 0 May 18th 06 08:30 AM
$850 for Clausing 8530 mill + Clausing 2' lathe? Steve Smith Metalworking 22 April 21st 05 04:33 PM
Pictures of Clausing 8530 mill and clausing lathe! Gunner Metalworking 0 April 20th 05 11:47 AM
FS:11" Logan, 12" Clausing lathes and Clausing 8530 Mill Dick Streff Metalworking 2 February 22nd 04 05:57 PM
CLAUSING 1300 13" x48" VARIABLE SPEED LATHE Paul Metalworking 5 February 13th 04 01:51 AM


All times are GMT +1. The time now is 01:41 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"