Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,384
Default Project help needed- Turbine engine

Ignoramus26157 wrote:
RDF, I have never seen any turbine powerplants on auctions, never
ever. A good issue of thrust was raised. I would love to stop by and
have a look at whatever you are making when you have something of
interest.

They show up on eBay regularly. look for "gas turbine", "jet
engine", etc. You'll get a ton of toy trucks and locomotives,
but there are a bunch of APUs, jet fuel starters, and other
small gas turbines from AiResearch, Snecma/CFM, and a few that
don't come to mind immediately. They are in the 20-50 Hp range,
and can be picked up by one person. Some of them are incredibly
small, basically the size of a truck turbocharger with
accessories attached. (There are also some larger APU engines,
an occasional helicopter engine, and even complete jet engines
of various types, mostly VERY old. These don;t show up as
often, but if you keep watch, you will see them a few times a year.)

Jon
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RDF, turbine engine Ignoramus26157 Metalworking 2 September 18th 07 05:03 AM
Project help needed- Turbine engine Jon Elson Metalworking 0 September 17th 07 05:13 AM
ideas needed on engine hoist rb Home Repair 2 June 15th 07 03:45 AM
Solar powered stirling engine project Morris Dovey Woodworking 33 September 1st 06 02:31 AM
sheet metal gas engine project clare @ snyder.on .ca Metalworking 10 August 27th 03 01:47 AM


All times are GMT +1. The time now is 01:45 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"