Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Wireless Networking - Update
In my previous post, I was interested in connecting my Linux based EMC2 CNC
lathe control computer connected to the internet for updates, etc. I also wanted to get an internet connection to a cabin ~ 800' away though a weed & tree line. I bought a Buffalo ethernet converter and a Buffalo high power wireless router ($110 total shipped). The ethernet converter has 4 ethernet RJ-45 jacks, I have my Linux PC plugged into one and plugged the WAN connection of the router into another port on the ethernet converter. Now my Linux PC has internet connection as do PC's connected to the Buffalo router. And I have spare ports to add a security camera(s). I used a Buffalo High Power notebook adapter in my laptop and was able to connect to the internet at the location where the cabin is going to be. This was without an external antenna on the notebook adapter and only the stock antenna on the router. The placement of the router was next to the outside wall and a few feet lower than ideal. I did notice my connection depended on the direction of the laptop. If I run a directional outdoor antenna at each end, I think I should be able to get a strong signal throughout the year and in less than ideal weather. Just thought this info may benefit others. RogerN |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wireless Networking | Metalworking | |||
Wireless IP camera as baby monitor - update | UK diy | |||
Wireless Networking Conundrum | UK diy | |||
OT (a little) - Networking Questions | UK diy | |||
Update: Adding a wireless room thermostat (help needed) | UK diy |