Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,138
Default Some little tools for loading ammo

Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,154
Default Some little tools for loading ammo

On Sun, 12 Aug 2007 02:47:16 -0500, with neither quill nor qualm, Don
Foreman quickly quoth:

Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Cute! Whassa "Gander Mountain"? (Ah, googled it and found that it's
like our Big5, BlackBird, or GI Joe's sporting goods stores)

--
The ancient and curious thing called religion, as it shows itself in the
modern world, is often so overladen with excrescences and irrelevancies
that its fundamental nature tends to be obscured.
--H.L. Mencken in "Treatise on the Gods"
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 111
Default Some little tools for loading ammo

Don Foreman wrote:
Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Nice ! A lot of commercial funnels cone the outlet too . Makes it usable for
more than one caliber , but then takes a hand to steady it while pouring .
Just out of curiosity , why don't you use an adjustable powder measure ?
Looking for that last tenth of a moa ?
If that is the case , have you checked your case necks for uniform
thickness and concentricity ? I have a sweet little outside neck turning
tool that a friend made me years ago , has a replaceable pilot (to change
calibers) and uses a 1/4" lathe bit as a cutter .
--

Snag aka OSG #1
'90 Ultra , "Strider"
The road goes on forever ...
none to one to reply


  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 509
Default Some little tools for loading ammo

On Sun, 12 Aug 2007 07:32:11 -0500, "Snag"
wrote:

Don Foreman wrote:
Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Nice ! A lot of commercial funnels cone the outlet too . Makes it usable for
more than one caliber , but then takes a hand to steady it while pouring .
Just out of curiosity , why don't you use an adjustable powder measure ?
Looking for that last tenth of a moa ?
If that is the case , have you checked your case necks for uniform
thickness and concentricity ? I have a sweet little outside neck turning
tool that a friend made me years ago , has a replaceable pilot (to change
calibers) and uses a 1/4" lathe bit as a cutter .


Ditto on the nice. For handguns, I used to use a small powder measure
with fixed brass rotors. After working up a load, I'd just drill or
fill another rotor. This was with the Rockchucker, pre-Dillon.

Pete Keillor
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 111
Default Some little tools for loading ammo

Pete Keillor wrote:
On Sun, 12 Aug 2007 07:32:11 -0500, "Snag"
wrote:

Don Foreman wrote:
Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Nice ! A lot of commercial funnels cone the outlet too . Makes it
usable for more than one caliber , but then takes a hand to steady
it while pouring . Just out of curiosity , why don't you use an
adjustable powder measure ? Looking for that last tenth of a moa ?
If that is the case , have you checked your case necks for uniform
thickness and concentricity ? I have a sweet little outside neck
turning tool that a friend made me years ago , has a replaceable
pilot (to change calibers) and uses a 1/4" lathe bit as a cutter .


Ditto on the nice. For handguns, I used to use a small powder measure
with fixed brass rotors. After working up a load, I'd just drill or
fill another rotor. This was with the Rockchucker, pre-Dillon.

Pete Keillor


I got mine (the bigger RCBS measure) in the 70's , courtesy of a loving wife
.. I kept her , we celebrate our 34th next week .
She understands ...
--

Snag aka OSG #1
'90 Ultra , "Strider"
The road goes on forever ...
none to one to reply




  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,138
Default Some little tools for loading ammo

On Sun, 12 Aug 2007 07:32:11 -0500, "Snag"
wrote:

Don Foreman wrote:
Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Nice ! A lot of commercial funnels cone the outlet too . Makes it usable for
more than one caliber , but then takes a hand to steady it while pouring .
Just out of curiosity , why don't you use an adjustable powder measure ?
Looking for that last tenth of a moa ?


Let's just say I'm trying to give myself the best shot at 0.5 MOA and
better without spending a fortune at it or making a fetish of it.

I weigh each charge to 0.1 grain with a balance -- not an electronic
scale. The measure is just to get within trickle distance without
spending all day trickling.

I do use a volumetric measure for handgun ammo, crank it out like
jellybeans. I think DOA is a more reasonable measure of handgun
proficiency, read that however you might. G

If that is the case , have you checked your case necks for uniform
thickness and concentricity ? I have a sweet little outside neck turning
tool that a friend made me years ago , has a replaceable pilot (to change
calibers) and uses a 1/4" lathe bit as a cutter .


Cool. That may make my list of "shop season" projects.
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,138
Default Some little tools for loading ammo

On Sun, 12 Aug 2007 02:47:16 -0500, Don Foreman
wrote:

I updated the webpage with a photo of the little measure with handle
silverbrazed in place, and I added a dime to the photo for size
reference.
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 73
Default RCM: Some little tools for loading ammo


Hi Guys:

I'm going through the current topics to hopefully suggest a way to tag
valid RCM traffic.


Add RCM: on the beginning of the title line - BEFORE the obligatory OT?

Hang tiugh - keep posting.

CaveLamb
  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 111
Default Some little tools for loading ammo

Don Foreman wrote:
On Sun, 12 Aug 2007 07:32:11 -0500, "Snag"
wrote:

Don Foreman wrote:
Metal content.

http://users.goldengate.net/~dforeman/ammo_tools/


Nice ! A lot of commercial funnels cone the outlet too . Makes it
usable for more than one caliber , but then takes a hand to steady
it while pouring . Just out of curiosity , why don't you use an
adjustable powder measure ? Looking for that last tenth of a moa ?


Let's just say I'm trying to give myself the best shot at 0.5 MOA and
better without spending a fortune at it or making a fetish of it.

I weigh each charge to 0.1 grain with a balance -- not an electronic
scale. The measure is just to get within trickle distance without
spending all day trickling.

I do use a volumetric measure for handgun ammo, crank it out like
jellybeans. I think DOA is a more reasonable measure of handgun
proficiency, read that however you might. G

If that is the case , have you checked your case necks for uniform
thickness and concentricity ? I have a sweet little outside neck
turning tool that a friend made me years ago , has a replaceable
pilot (to change calibers) and uses a 1/4" lathe bit as a cutter .


Cool. That may make my list of "shop season" projects.


Mine's about 1X2X3 , with a notch across one short end
---------
I I----
I I
-------------- kinda like that , with the pilot protruding into the L from
one side and the cutter at 90* . I quit chasing that elusive half a minute
years ago .
And with handguns , DOA works for me . The 'bangers in my hood don't wanna
mess with the Harley Guy , he packs a big 'ol pistol .
And knows how to use it .
--

Snag aka OSG #1
'90 Ultra , "Strider"
The road goes on forever ...
none to one to reply


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind loading and snow loading values [email protected] UK diy 2 June 1st 07 08:56 AM
refi ammo? [email protected] Home Ownership 8 June 8th 06 09:33 PM
Desperate for front-loading, top-loading washer advice [email protected] Home Ownership 7 August 22nd 05 07:06 PM
Desperate for front-loading, top-loading washer advice [email protected] Home Repair 13 August 22nd 05 05:58 AM
What's an ammo can made out of [email protected] Metalworking 13 February 23rd 05 10:34 PM


All times are GMT +1. The time now is 06:01 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"