 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
the most inexpensive lead screw needed
I am on a very tight budget and so I need the most inexpensive lead
screw I can find. Not only that, but I only need the screw to bear a load of at most 15 pounds. I have done considerable searching, but cannot find any suited for my very small scale project at a reasonable price. The following link is for the least expensive I have found so far, but it still has a capacity of 240 pounds for a plastic nut: http://www.roton.com/Mating_Componen...family=7060762 Is there anything less expensive than that? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Jet 9X20 lead screw ? | Metalworking | |||
| finishing ends on a lead screw | Metalworking | |||
| Source for 1/2-8 LH Precision Acme Lead Screw | Metalworking | |||
| lead screw assmbely | Metalworking | |||
| Straighten a acme lead screw? | Metalworking | |||
Threaded Mode
