need owners manual for a mill and a lathe
need a owners manual for a lagun FTV-2 mill and an American Turnmaster13x40 lathe.
|
need owners manual for a mill and a lathe
Hey Harley,
I can probably help out with the lathe manual. I expect I can get it photo-copied somewhere. And for something that says "Price:$50.00" on the front cover, other than the "cover(s)" on my manual, all the rest looks like the 5th copy of a copy of a Gestetner stencil! Kinda crappy, but useable. I couldn't recall any non-metallic gears either, so I just went and had a look. I did not remove the top plate and look into the spindle drive train, but I did pull the cover guard off the end to see the saddle drive gear train from the spindle to the gear-box, and as far as I can tell there are no non-metallic gears there either. My machine Serial Number is: S/N 1340F0885256 and was apparently new in 1989. I got it from a friend who got it at school sale in about 199 Write to me at either: or Take care. Brian Lawson, Bothwell, Ontario. On 25 Jul 2004 19:27:02 -0700, (Harley) wrote: need a owners manual for a lagun FTV-2 mill and an American Turnmaster13x40 lathe. |
need owners manual for a mill and a lathe
Have you checked with the manufacturer?
http://www.lagun.com/lathes/amtlathes.html Best Regards, Keith Marshall "Even if you are on the right track, you'll get run over if you just sit there." - Will Rogers (1879-1935). "Harley" wrote in message om... need a owners manual for a lagun FTV-2 mill and an American Turnmaster13x40 lathe. |
All times are GMT +1. The time now is 01:54 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter