Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Wayne
 
Posts: n/a
Default Good day at the recycling center

My wife asked me if I could stop by the recycling center and get some
planting pots, well non to be found. But on my way out I saw a lathe cabinet
in the back of a pick up, so I turned around and asked the guy if he was
dumping the lathe stand. He said yes and if I wanted the lathe he was
dumping that also. So now I have a South bend heavy 10 to play with. Looks a
bit worn but not to bad, he also said he has some tooling to go with it and
he will put it in a box for me.


  #2   Report Post  
wallster
 
Posts: n/a
Default Good day at the recycling center


Wayne makowicki wrote in message
...
My wife asked me if I could stop by the recycling center and get some
planting pots, well non to be found. But on my way out I saw a lathe

cabinet
in the back of a pick up, so I turned around and asked the guy if he was
dumping the lathe stand. He said yes and if I wanted the lathe he was
dumping that also. So now I have a South bend heavy 10 to play with. Looks

a
bit worn but not to bad, he also said he has some tooling to go with it

and
he will put it in a box for me.


nice find Wayne... alot of tooling around for southbend lathes!

walt


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Idle thoughts re generators Neil Jones UK diy 143 April 14th 04 03:31 PM
Tiling Advice - Any good reason I cant use mortar as Wall Tile Adhesive SledgehammerSteve UK diy 12 December 22nd 03 05:16 PM
Electronic/Automatic welding masks - a good thing? Frank UK diy 1 July 21st 03 01:39 PM


All times are GMT +1. The time now is 08:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"