Gunner
 

Sent several emails and no replies. Perhaps being eaten up by your spam
software?
Still looking for an 8" faceplate 1-3/4"x8TPI and now a 10" Steady rest (or
maybe a 10-12" that I could modify) for the same machine. A Clausing.

Gunner
 

On Mon, 07 Jun 2004 14:13:43 GMT, Marty Escarcega
wrote:

Sent several emails and no replies. Perhaps being eaten up by your spam
software?
Still looking for an 8" faceplate 1-3/4"x8TPI and now a 10" Steady rest (or
maybe a 10-12" that I could modify) for the same machine. A Clausing.

I replied that I didnt have one. Btw..I may be going out to Pheniox
at the latter part of the week or early next week. At this time its
not definite, and I dont know if Ill be driving, or the customer will
pay for a plane ticket. Ill let you know where/when/how and I can
load up the truck with Stuff.

When Ryobi/MTD Products lets me know..Ill let you know.

Gunner

That rifle hanging on the wall of the working-class flat or labourer's
cottage is the symbol of democracy. It is our job to see that it stays
there.
- George Orwell

Gunner
 

I'm not Gunner, but would you be interested in an as-received MLA steady
rest casting kit? It was purchased for a Clausing 12" lathe but an original
made it's way to me before I started modifying the castings. As you may
know it was designed for a 9" SB.

Mike

"Marty Escarcega" wrote in message
...
Sent several emails and no replies. Perhaps being eaten up by your spam
software?
Still looking for an 8" faceplate 1-3/4"x8TPI and now a 10" Steady rest
(or
maybe a 10-12" that I could modify) for the same machine. A Clausing.

Gunner
 

Mike I have seen you post before. Many thanks for attempting to answer
the call. Please email details and price. Does it appear there may be
enough "meat" for it to be fit to a 10" machine? I am somewhat familiar
with the kits form MLA.

Thanks again,
Marty

[posted and mailed]

"Mike Henry" wrote in
:

I'm not Gunner, but would you be interested in an as-received MLA
steady rest casting kit? It was purchased for a Clausing 12" lathe
but an original made it's way to me before I started modifying the
castings. As you may know it was designed for a 9" SB.

Mike

"Marty Escarcega" wrote in message
...
Sent several emails and no replies. Perhaps being eaten up by your
spam software?
Still looking for an 8" faceplate 1-3/4"x8TPI and now a 10" Steady
rest
(or
maybe a 10-12" that I could modify) for the same machine. A Clausing.