Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Morse Tapers...
I know of the MT1 thru MT5... Are there larger Morse Tapers out there? MT6
or larger? Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com V8013-R |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Morse Tapers...
Machinery handbook lists morse tapers 0 through 7 (that's one smaller and
two bigger) -- (©¿©) An apple a day keeps the doctor away. Two apples a day gets the doctor's OK. Five a day makes you a fruit grower like me. Karl Townsend "Joe AutoDrill" wrote in message news:U728g.2075$NB6.345@trndny03... I know of the MT1 thru MT5... Are there larger Morse Tapers out there? MT6 or larger? Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com V8013-R |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Morse Tapers...
we have some mt-6 tapers at the shaop , never seen a seven though ,
there are also the jarno series of tapers |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
morse tapers | Woodturning | |||
Stuck 2-3 Morse taper adapter | Woodturning | |||
FS Morse Taper Drill Drivers | Metalworking | |||
Separating Morse Tapers | UK diy | |||
A tale of woe and a caution re tangless Morse tapers, :( | Woodturning |