DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Skil Classic 2.5hp saw repair? (https://www.diybanter.com/metalworking/152957-skil-classic-2-5hp-saw-repair.html)

Gunner April 11th 06 10:05 PM

Skil Classic 2.5hp saw repair?
 
Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?

Sources for bearings and the screw/stuff that holds the blade on?

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist

spaco April 11th 06 10:29 PM

Skil Classic 2.5hp saw repair?
 
Can't say that you can "make money" repairing it, but if you google
"skilsaw parts" you'll get a lot of hits from places that sell parts.
You can usually look around on the sites to find your model, and see the
parts you need, with prices. I have gone this route several times.

Pete Stanaitis
--------------------

Gunner wrote:
Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?

Sources for bearings and the screw/stuff that holds the blade on?

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist


Eric R Snow April 11th 06 11:21 PM

Skil Classic 2.5hp saw repair?
 
On Tue, 11 Apr 2006 21:05:39 GMT, Gunner
wrote:

Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?

Sources for bearings and the screw/stuff that holds the blade on?

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist

That saw, if anything at all like mine, is a big P.O.S. Mine sounded
bad almost right away. I didn't use it much so by the time it sounded
bad it was out of warranty. Then, after only about 1 hour of use, the
thing melted a brush holder. Brushes and holders were not available at
any local place. The Classic saw parts could only be had mail order.
So I made up a new brush holder and modified a larger brush to fit.
Started fine, sounded like crap, even though everything was greased
and put together properly. Started to use it and got maybe 4 2 x 4s
cut when it quit agian, this time jamming. Looking inside revealed the
commutator segments that had come loose and jammed up the works. I
removed the new carbide toothed blade and threw the rest away.
ERS

RoyJ April 12th 06 01:22 AM

Skil Classic 2.5hp saw repair?
 
I think the 'Classic' is their $40 special. If so, it has nothing but
bushings in the critical spots. I've rebuilt a couple of these, they
work fine with an abrasive saw blade and then toss the whole thing. If
it isn't the ball bearing models, forget it.

spaco wrote:
Can't say that you can "make money" repairing it, but if you google
"skilsaw parts" you'll get a lot of hits from places that sell parts.
You can usually look around on the sites to find your model, and see the
parts you need, with prices. I have gone this route several times.

Pete Stanaitis
--------------------

Gunner wrote:

Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?

Sources for bearings and the screw/stuff that holds the blade on?

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural patterns
relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist


Gunner April 12th 06 02:37 AM

Skil Classic 2.5hp saw repair?
 
On Tue, 11 Apr 2006 16:29:40 -0500, spaco
wrote:

Can't say that you can "make money" repairing it, but if you google
"skilsaw parts" you'll get a lot of hits from places that sell parts.
You can usually look around on the sites to find your model, and see the
parts you need, with prices. I have gone this route several times.

Pete Stanaitis
--------------------


I dont want to make money..it appears that my post last month about
not needing to lock things up was a bit..premature. My favorite
Rockwell worm drive saw and all my angle grinders were last seen being
sold out of the back of a womans car.

I did manage to buy the Milwaukee Sawzall and 9" angle grinder back
from one of the old boys who bought em.

They know who she is..long time local thieve..so its a race wither the
cops or..ah..someone close to me catches up with her first.

I just need a power saw to cut stuff with.

Gunner



Gunner wrote:
Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?

Sources for bearings and the screw/stuff that holds the blade on?

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist


"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist

Jedd Haas April 12th 06 03:08 PM

Skil Classic 2.5hp saw repair?
 
In article ,
Gunner wrote:

Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?


You can buy a new one for under $40.

--
Jedd Haas - Artist - New Orleans, LA
http://www.gallerytungsten.com
http://www.epsno.com

Gunner April 12th 06 04:17 PM

Skil Classic 2.5hp saw repair?
 
On Wed, 12 Apr 2006 09:08:20 -0500, Jedd Haas wrote:

In article ,
Gunner wrote:

Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?


You can buy a new one for under $40.



Ah! ok. Paperweight/doorstop.

Bummer


Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist

Mike Berger April 12th 06 04:19 PM

Skil Classic 2.5hp saw repair?
 
Uhh.. what... stuff?
Maybe you should just let the cops take care of it.

Gunner wrote:

They know who she is..long time local thieve..so its a race wither the
cops or..ah..someone close to me catches up with her first.

I just need a power saw to cut stuff with.

Gunner


Glenn April 12th 06 04:53 PM

Skil Classic 2.5hp saw repair?
 

"Gunner" wrote in message
...
On Wed, 12 Apr 2006 09:08:20 -0500, Jedd Haas wrote:

In article ,
Gunner wrote:

Guy gave me a Ski 7" saw yesterday. "Classic" model. Sorta a gold
color, in a fitted case.

Sounds like a Clabber Girl can full of ball bearings being spun up.

These saws worth repairing?


You can buy a new one for under $40.



Ah! ok. Paperweight/doorstop.

Bummer


Gunner


You could take it apart and just lube all the moving parts and add new
geargrease. Then mount an abrasive blade on it and cut anything ya want
with no fear of destroying a good saw.

Glenn



Gunner April 12th 06 07:32 PM

Skil Classic 2.5hp saw repair?
 
On Wed, 12 Apr 2006 10:19:19 -0500, Mike Berger
wrote:

Uhh.. what... stuff?
Maybe you should just let the cops take care of it.

Gunner wrote:

They know who she is..long time local thieve..so its a race wither the
cops or..ah..someone close to me catches up with her first.

I just need a power saw to cut stuff with.

Gunner



With 2500 square miles of desert..and access to any number of
backhoes...using a saw for ThAT purpose is counterproductive.

Bad guys are always good down deep.

Gunner

"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist

pyotr filipivich April 13th 06 03:28 PM

Skil Classic 2.5hp saw repair?
 
Okay, so I'm late and catching up, but Gunner
wrote on Wed, 12 Apr 2006 18:32:59 GMT in rec.crafts.metalworking :
On Wed, 12 Apr 2006 10:19:19 -0500, Mike Berger
wrote:

Uhh.. what... stuff?
Maybe you should just let the cops take care of it.

Gunner wrote:

They know who she is..long time local thieve..so its a race wither the
cops or..ah..someone close to me catches up with her first.

I just need a power saw to cut stuff with.

Gunner



With 2500 square miles of desert..and access to any number of
backhoes...using a saw for ThAT purpose is counterproductive.


And it is bad for the saw, all that salt solution. Corrosive as heck.

--
pyotr filipivich
My suggestion for rapists is "shoot, shovel and shut up."
Use a backhoe. Because as any rapist's friends and family will tell you
"deep down, they're good people."


All times are GMT +1. The time now is 06:29 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter