Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
aluminum/brass reaction?
I would like to tap a barbed fitting into the aluminum gearcase of my
outboard motor. I cannot find stainless barbed fittings and I assume brass and aluminum touching under salt water is a no- no. If I tap the aluminum to take a stainless 1/4" bushing and then thread in a 1/8" barbed brass fitting will there still be corrosion problems. There are several zinc anodes on the motor and aluminum hull. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
ALLERGIC REACTION TO LOFT INSULATION | UK diy | |||
Reaction of bleach and loose-fill insulation? | Home Repair | |||
Allergic Reaction to Cocobolo | Woodturning | |||
Reaction wood | Woodturning | |||
Reaction of Titanium and Steel | Metalworking |