Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Mounting plain-back chuck...
I just purchased a 6" 4-jaw chuck on Ebay. It has a plain back, and I have
a backplate that will mount on my lathe that I'm pretty sure I can adapt to fit the chuck. I *think* I know the right way to do this...but I just want to make sure. The chuck has a round recess on the back, and four mounting screws. My guess is that I can't just use the screws to locate the chuck accurately dead-center. It looks to me like I should face the backplate so that it has a round step that will just fit snug inside the recess on the back of the chuck, which will line up the center of the chuck with the lathe spindle...., and the screws will lock it in place... Before I create some scrap...does this sound right? Todd |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for compact drill chuck | Metalworking | |||
Backplate stuck on 8" 3 Jaw chuck??? | Metalworking | |||
bought a chuck on ebay from marjenmachine | Metalworking |