Tool cleaning
I have a old steel t-square (18 X 30) that has become corroded and
dirty to the extent the numbers are hard to read. I have tried a few solvents and steel wool but not much luck. Does anyone have any suggestions for cleaning this flat steel tool. Thanks Robert |
Tool cleaning
RBW wrote:
I have a old steel t-square (18 X 30) that has become corroded and dirty to the extent the numbers are hard to read. I have tried a few solvents and steel wool but not much luck. Does anyone have any suggestions for cleaning this flat steel tool. Thanks Robert Vinegar saturated with salt - soak (fully covered!) overnight. Rust and stains will be gone. Rinse well and immediately oil. Ken. |
Tool cleaning
RBW wrote:
I have a old steel t-square (18 X 30) that has become corroded and dirty to the extent the numbers are hard to read. I have tried a few solvents and steel wool but not much luck. Does anyone have any suggestions for cleaning this flat steel tool. Thanks Robert Scrub it with a bar of lava soap. |
Tool cleaning
RBW wrote:
I have a old steel t-square (18 X 30) that has become corroded and dirty to the extent the numbers are hard to read. I have tried a few solvents and steel wool but not much luck. Does anyone have any suggestions for cleaning this flat steel tool. Thanks Robert Evaporust |
All times are GMT +1. The time now is 05:05 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter