Reduce condensation in auxillary compressed air tank by filling technique?
 

I have the occasion to fill an auxillary tank from my main compressor tank.
The auxillary tank has the ability to be filled *as* the main compressor
tank fills, or be filled *after* the main compressor tank has reached
pressure.

Will waiting until the main compressor tank has filled reduce the amount of
condensation in the auxillary tank?

My thinking is that as the air is compressed, water comes out of the air as
the pressure is increased, and that by filling from the main tank after it
has come up to pressure, the air transfered will have already lost the water
it carried in the main tank, and result in less condensation in the
auxillary tank.

Any thoughts on this?

Thanks,

Jon

Reduce condensation in auxillary compressed air tank by filling technique?
 

"Jon Danniken" wrote in message
...
I have the occasion to fill an auxillary tank from my main compressor
tank.
The auxillary tank has the ability to be filled *as* the main compressor
tank fills, or be filled *after* the main compressor tank has reached
pressure.

Will waiting until the main compressor tank has filled reduce the amount
of
condensation in the auxillary tank?

My thinking is that as the air is compressed, water comes out of the air
as
the pressure is increased, and that by filling from the main tank after it
has come up to pressure, the air transfered will have already lost the
water
it carried in the main tank, and result in less condensation in the
auxillary tank.

Any thoughts on this?

Thanks,

Jon


Warm air carries more moisture than cold. If you allow the air to cool after
being compressed, you should get less moisture in your tank.