pitch = timing belt pulleys tooth spacing ?
 

How do I make sure timing belt pulleys match up to the belt tooth spacing ?
Is that called pitch ?
The scenario I am thinking of is when I have a smaller pulley on a motor
shaft, and a larger one on a wheel shaft, with a belt connecting the two and
transferring power.
Thanks !

pitch = timing belt pulleys tooth spacing ?
 

Pitch is the center to center distance of the teeth. BTW the belts come
in both curved tooth and trapazoidal tooth

You might want to review www.mcmaster.com search on "timing belt". they
have a lot of info that you will need.

pogo wrote:
How do I make sure timing belt pulleys match up to the belt tooth spacing ?
Is that called pitch ?
The scenario I am thinking of is when I have a smaller pulley on a motor
shaft, and a larger one on a wheel shaft, with a belt connecting the two and
transferring power.
Thanks !

pitch = timing belt pulleys tooth spacing ?
 

Pitch is the center to center distance of the teeth. BTW the belts come
in both curved tooth and trapazoidal tooth

You might want to review www.mcmaster.com search on "timing belt". they
have a lot of info that you will need.

So if I get 2 different diameter pulleys with the same pitch and type of
teeth, the both should fit the same kind of belt, right ?

pitch = timing belt pulleys tooth spacing ?
 

pogo writes:

So if I get 2 different diameter pulleys with the same pitch and type of
teeth, the both should fit the same kind of belt, right ?

Various belt widths, also.

See:

http://www.gates.com/facts/index.cfm...cation_id=3258

Especially:

http://www.gates.com/facts/documents/Gf000284.pdf

pitch = timing belt pulleys tooth spacing ?
 

Various belt widths, also.
http://www.gates.com/facts/index.cfm...cation_id=3258
Especially:
http://www.gates.com/facts/documents/Gf000284.pdf

Good info. Thanks !