Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Edge margin for holes in Lugs
I apologize for an actual on-topic post but I'm stumped.
I once had an old engineering book that had info on edge margins for holes. The edge margins for thin sheet are well known and easily found, but I'm having no luck locating the tables for Lugs. As I best recall the difference is the relative thickness of the metal being bolted or riveted. Can anyone help me out here? Richard |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lee Valley straightedges - slight twist | Woodworking | |||
Sanding floorboards - Drum Sander and or Edge Sander | UK diy | |||
Edge gluing boards | Woodworking | |||
Failure to get sharp | Metalworking | |||
Knife Steel FAQ updated | Metalworking |