Good used tig welder
 

Hi Metal workers

I have enjoyed reading your past postings about the best small tig
machine and have a couple of questions.

How do the chinese machines rate they seem to do everything plasma
cutter, tig.stick. and how do you like your machine.

My son and I are building a 23 t-bucket and are looking for a tig
machine to add to our shop Is there a good old tig machine that you
could recommend to keep on the lookout for.

Thanks Ben and Nicky

Good used tig welder
 

My son and I are building a 23 t-bucket and are looking for a tig
machine to add to our shop Is there a good old tig machine that you
could recommend to keep on the lookout for.

My Lincoln "Ideal Arc" is a great stick/TIG welder. Not as nice as the newer
square waves etc. but a very nice welder. You just about have to find a used
one locally. Shipping cost will kill you, otherwise.

Karl

Good used tig welder
 

Hi Karl

Nick and I were at an auction of a high school shop class equipment
and there was that very machines not sure of the model but it was very
large and would have taken up to much of our small shop and your right
on about moveing something that heavy realy adds to the cost. i just
saw more adds on those tig welders from china, has any one give them a
try . Thanks Ben

Good used tig welder
 

"Ben" wrote in message
ups.com...
Hi Karl

Nick and I were at an auction of a high school shop class equipment
and there was that very machines not sure of the model but it was very
large and would have taken up to much of our small shop and your right
on about moveing something that heavy realy adds to the cost. i just
saw more adds on those tig welders from china, has any one give them a
try . Thanks Ben


Can you drive to China every time you need parts or have to have it fixed?

Stick with an American machine.

Steve

Good used tig welder
 

On 11 Feb 2006 18:12:06 -0800, "Ben" wrote:

Hi Metal workers

I have enjoyed reading your past postings about the best small tig
machine and have a couple of questions.

How do the chinese machines rate they seem to do everything plasma
cutter, tig.stick. and how do you like your machine.

My son and I are building a 23 t-bucket and are looking for a tig
machine to add to our shop Is there a good old tig machine that you
could recommend to keep on the lookout for.

Thanks Ben and Nicky

Your project presumably involves a fair amount of work with steel
sheetmetal. I think you'd want a TIG with footpedal control and HF
start. Scratch start is possible on steel, but HF is a lot easier to
manage.

Why TIG vs MIG? Most autobody guys use MIG. It's a lot faster, a
lot easier, lower first cost and it is capable of beautiful work on
sheetmetal. Speed is an advantage because it minimizes distortion.

Good used tig welder
 

"Ben" wrote in message
ups.com...
Hi Karl

Nick and I were at an auction of a high school shop class equipment
and there was that very machines not sure of the model but it was very
large and would have taken up to much of our small shop and your right
on about moveing something that heavy realy adds to the cost. i just
saw more adds on those tig welders from china, has any one give them a
try . Thanks Ben

Ben,
I have the Harbor Freight TIG. It is an inverter and DC only. Lift arc
start and no remote control. It works quite well on about anything but
aluminum. Aluminum is possible but really tough to make work. I also have
a Miller Dialarc 250 with a TIG head that works much better on Aluminum and
the heavier stuff. The Dialarc does not go down low enough for really fine,
thin work. Knowing what you are planning to weld would help (23 Tbucket is
a bit vague) The dryer outlet will run the HF machine just fine but you
will be quite limited in output for some of the big old transformer
machines. I can only get about 200 amps out of the Miller before I blow a
50 amp breaker.
Glenn

Good used tig welder
 

Ben wrote:
Hi Metal workers

I have enjoyed reading your past postings about the best small tig
machine and have a couple of questions.

How do the chinese machines rate they seem to do everything plasma
cutter, tig.stick. and how do you like your machine.

My son and I are building a 23 t-bucket and are looking for a tig
machine to add to our shop Is there a good old tig machine that you
could recommend to keep on the lookout for.
I got a (well) used Lincoln Square-wave TIG 300, which will also do
stick. Due to the fumes, I probably will NEVER do stick again.
The machine is totally awesome. When I was first starting with it,
I actually did a little welding with the HF, before realizing that
that wasn't even the main welding current! You probably don't
need square-wave for your work (presumably all steel). So, there
are a wide range of TIG machines around. I would definitely get
one with a good HF unit, that really makes starting and mainaining
the arc a breeze.

Jon