 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Lookin For: Crank for 1.5hp Economy
I'm looking for a starting crank for a 1-1/2 HP Economy hit-and-miss
engine. It has a 1-1/4" shaft with a 5/16" keyway. If somebody has one or can point me in the right direction to find one it would be greatly appreciated. Yanking on the flywheel to start it is getting old fast! Thanks. Steve |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Lookin For: Crank for 1.5hp Economy
Try this link, someone may have a crank: http://enginads.com/
Steve Mulhollan wrote: I'm looking for a starting crank for a 1-1/2 HP Economy hit-and-miss engine. It has a 1-1/4" shaft with a 5/16" keyway. If somebody has one or can point me in the right direction to find one it would be greatly appreciated. Yanking on the flywheel to start it is getting old fast! Thanks. Steve |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| economy 7 water heater tripping electrical circuit | UK diy | |||
| Bush dishonesty: Deceives public about economy | Woodworking | |||
| OT - Gunner Quote | Metalworking | |||
| Economy 7 setup | UK diy | |||
| OT - NY Times economy article | Metalworking | |||
Linear Mode
