Central Boiler Stove update
|
Central Boiler Stove update
I just sledge pallets apart. The nails, etc. go into the stove and are
pulled out later in the ashes with no problems. -- Bob May Losing weight is easy! If you ever want to lose weight, eat and drink less. Works evevery time it is tried! |
Central Boiler Stove update
I welded up a pallet ripper after seeing my buddy's store bought version. Let
me see if I can describe, 4' of 3/4" or 1" black iron pipe for handle, 8" of same size for fulcrum, two 6-8" pieces of same size for prying arms. Constrtuction, 8" piece welded to 4' piece to make "T" two pieces are ground at there ends to the contour of the "T" and welded to the 8" piece to make lifting/prying arms. Should look kinda like a pickle fork when done, except lifter/pryer arms come off of fulcrum at about 45 degree angle. Space pry arms so a doubled spine pallet will still fit between them. To use slide lifters between pallet deck and pry apart. Also very useful for taking up outside decking. This took almost as long to describe as it took to build. As with most home built tools it works good enough that I have not bothered to improve it. The suggestion on pryarm spacing was learned after the fact. John H. |
Central Boiler Stove update
|
All times are GMT +1. The time now is 11:30 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter