Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
build a magnetizer/demagnetizer
I'm following Birk Peterson's published plans (Machinist's Workshop
April/May 2003) to build a magnetizer/demagnetizer using the coil from a surplus solenoid. On first pass it worked real well but after two or three 2 second cycles it burned up the coil. The coil came from a big Dormeyer intermittent duty relay. If I use a coil from a continuous duty relay will it survive longer? Any advice? It's a 115 Vdc circuit with a bridge rectifier to energize dc to mag and A/C to demag. Thanks in advance. Rick |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help - I need to build a false floor in a hurry! | UK diy | |||
Looking for Plans to build a hydraulic power pack? | Metalworking | |||
skateboard ramp build | UK diy |