Making an aluminum box
 

Alternate title: saved by the beltsander.

Warning: metal content.....

http://users.goldengate.net/~dforeman/ringlight_box/

Making an aluminum box
 

Don Foreman wrote:

Alternate title: saved by the beltsander.

Warning: metal content.....

http://users.goldengate.net/~dforeman/ringlight_box/

Nicely done. How about a picture of the
lightring?

Making an aluminum box
 

On Mon, 02 Jan 2006 22:07:17 -0800, Jim Stewart
wrote:

Don Foreman wrote:

Alternate title: saved by the beltsander.

Warning: metal content.....

http://users.goldengate.net/~dforeman/ringlight_box/

Nicely done. How about a picture of the
lightring?

I'll put up a web page of the whole project when it's casting lumens
on the worksurface. Shouldn't be long now. I'm expecting well over
10,000 lux of luminous intensity on the work surface at WOT.
(10,000 lux is the intensity of direct tropical mid-day sunlight.)

Making an aluminum box
 

Do you need a mig welder to change the battery?

Don Foreman wrote:
Alternate title: saved by the beltsander.

Warning: metal content.....

http://users.goldengate.net/~dforeman/ringlight_box/

Making an aluminum box
 

On Wed, 04 Jan 2006 11:10:00 -0600, Mike Berger
wrote:

Do you need a mig welder to change the battery?

Mains powered, no battery to change. Line cord goes thru a grommet
in the back. Bottom plate attaches with four 6-32 screws into tapped
lugs welded into the inside corners of the box.