Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking for parts source for Bridgeport Quillmaster
Howdy
I have a Bridgeport Quillmaster model JA with a broken tooth on one of the input bevel gears. I checked with several sources and can't find a replacement set. They are at a 45 deg angle rather than a 90 deg. 1.3 to 1 ratio (20 tooth and 26 tooth) Any thoughts would be appreceiated Gary |
#2
|
|||
|
|||
Looking for parts source for Bridgeport Quillmaster
--Where ya located? Have you tried Machinery Sales? They're the
distributors, parts houses for these machines in California. There's a branch in each end of the state. -- "Steamboat Ed" Haas : Om mane padme hum Hacking the Trailing Edge! : when does the money come? http://www.nmpproducts.com/intro.htm ---Decks a-wash in a sea of words--- |
#3
|
|||
|
|||
Looking for parts source for Bridgeport Quillmaster
I'm in Washington State. South of Olympia. I'll give them a try
Thanks On Sun, 21 Dec 2003 04:09:34 GMT, steamer wrote: --Where ya located? Have you tried Machinery Sales? They're the distributors, parts houses for these machines in California. There's a branch in each end of the state. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pearl Harbor | Metalworking | |||
Source for GOOD bolts, washers, copper washers, etc? | Metalworking |