Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 20th 03, 09:09 PM
Rich
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

I have for sale the Harbor Freight 7" x 10" PRECISION MINI LATHE . Purchased
at Harbor Freight in Orlando FL.
The lathe is new in the crate, the only the lid was opened to look inside.
With most (all) of my available time in woodworking I will not be using it.

We are on the east coast of Florida near Titusville and willing to drive to
say Orlando or North or South a bit from my location.

Will consider trades for hardwood lumber, woodturning tools, or a horizontal
belt sander (floor model in about any condition)!

Item sells for $369.00 at Harbor Freight. Lets make a deal! hehe.

Sincerely,
Rich





  #2   Report Post  
Old December 21st 03, 04:15 AM
jim
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

Rich wrote:

I have for sale the Harbor Freight 7" x 10" PRECISION MINI LATHE . Purchased
at Harbor Freight in Orlando FL.
The lathe is new in the crate, the only the lid was opened to look inside.
With most (all) of my available time in woodworking I will not be using it.

We are on the east coast of Florida near Titusville and willing to drive to
say Orlando or North or South a bit from my location.

Will consider trades for hardwood lumber, woodturning tools, or a horizontal
belt sander (floor model in about any condition)!

Item sells for $369.00 at Harbor Freight. Lets make a deal! hehe.

Sincerely,
Rich

just bring it back to the store and tell them you dont want it....
i am sure they will take it back.... or did you keep it for more than 30
days????
  #3   Report Post  
Old December 21st 03, 08:55 AM
Rich
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

just bring it back to the store and tell them you dont want it....
i am sure they will take it back.... or did you keep it for more than 30
days????


I've had it in my garage all summer.

Sincerely,
Rich


  #4   Report Post  
Old December 21st 03, 02:40 PM
Roy
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

On Sun, 21 Dec 2003 08:55:37 GMT, "Rich"
wrote:

=== just bring it back to the store and tell them you dont want it....
=== i am sure they will take it back.... or did you keep it for more than 30
=== days????
===
===I've had it in my garage all summer.
===
===Sincerely,
===Rich
===


Uncrate that sucker and fire it up, and make some metal chips. Its
adictive, and may just replace woodchips and sawdust ;-) I can think
of a few items the lathe would be handy in a woodworking shop
especially if you make any homemade tools etc. It could proove
usefull.

Visit my website: http://www.frugalmachinist.com
Opinions expressed are those of my wifes,
I had no input whatsoever.
Remove "nospam" from email addy.
  #5   Report Post  
Old December 23rd 03, 06:07 PM
steamer
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

--Somehow it seems odd to hear "Harbor Freight" and "precision" in
the same sentence. Heh.

--
"Steamboat Ed" Haas : Om mane padme hum
Hacking the Trailing Edge! : when does the money come?
http://www.nmpproducts.com/intro.htm
---Decks a-wash in a sea of words---


  #6   Report Post  
Old December 23rd 03, 10:09 PM
David Billington
 
Posts: n/a
Default FS: Harbor Freight 7" x 10" PRECISION MINI LATHE

I have often wondered why trading standard in the UK don't do machine
mart for selling the Clarke brand lathe with the description "Precision
toolroom" lathe all for about 700. Like you say it doesn't go together.

steamer wrote:

--Somehow it seems odd to hear "Harbor Freight" and "precision" in
the same sentence. Heh.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
craftsman 109.20630 mini lathe -- my first lathe!! yay!! drew j. Metalworking 5 November 22nd 03 12:46 AM
Odors from Running a Mini Lathe Finite Guy Metalworking 16 November 15th 03 11:25 AM
Question on Mini Lathe (7x10) Spindle David Heidary Metalworking 2 October 27th 03 10:43 PM
FS, South Bend Model A Precision 9" Lathe M Metalworking 0 October 17th 03 02:59 AM
Mini Lathe Bed Extention David Heidary Metalworking 15 July 31st 03 09:35 PM


All times are GMT +1. The time now is 05:37 AM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017