Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Homemade cement mixer?
Anyone out there ever make one? I have a small Kubota Tractor with a pto
capable of 14 hp, and lots of old 50-80 gallon steel water tanks. Would be nice to be able to mix up a decent amount instead of the one cubic foot that most do. Any ideas would be appreciated, like how to slow the 540 rpm pto to what??? 40? Thanks RO |
#2
|
|||
|
|||
Homemade cement mixer?
In article , Robert Olin
wrote: Anyone out there ever make one? I have a small Kubota Tractor with a pto capable of 14 hp, and lots of old 50-80 gallon steel water tanks. Would be nice to be able to mix up a decent amount instead of the one cubic foot that most do. Any ideas would be appreciated, like how to slow the 540 rpm pto to what??? 40? Thanks RO Have the PTO drive a small wheel that rubs against the drum. |
#3
|
|||
|
|||
Homemade cement mixer?
Any ideas would be appreciated, like how to slow the 540 rpm pto
to what??? 40? Thanks RO Have the PTO drive a small wheel that rubs against the drum. my mixer runs around 25 rpms. At that rate you would need a 1" diameter tire running against a 24" drum |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wanted: Cement Mixer | UK diy | |||
Advice on which shower mixer? | UK diy |