Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tom Gardner: another tape measure
Saw this in a magazine at the book sto
http://www.fastcap.com/prod.asp?page=procarp The ad showed the PS-SP model, which maybe easier to explain to the hired help? Or you could just mark on the tape where the need to be... Joel. phx |
#2
|
|||
|
|||
Tom Gardner: another tape measure
Perfect! Thanks! Problem solved!
See, if you throw enough stuff at the wall, some sticks! "Joel Corwith" wrote in message ... Saw this in a magazine at the book sto http://www.fastcap.com/prod.asp?page=procarp The ad showed the PS-SP model, which maybe easier to explain to the hired help? Or you could just mark on the tape where the need to be... Joel. phx |
#3
|
|||
|
|||
Tom Gardner: another tape measure
In article , Tom Gardner wrote:
Perfect! Thanks! Problem solved! See, if you throw enough stuff at the wall, some sticks! i can't believe the prices, wondering if it is for refills. --Loren "Joel Corwith" wrote in message ... Saw this in a magazine at the book sto http://www.fastcap.com/prod.asp?page=procarp The ad showed the PS-SP model, which maybe easier to explain to the hired help? Or you could just mark on the tape where the need to be... Joel. phx |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reading a tape measure...again | Metalworking | |||
Duct vs Gaffa vs Duck tape | UK diy | |||
'Laser' measure | UK diy |