Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
alexkuzn
 
Posts: n/a
Default Looking for Alumina Ceramics Rods manufacturer.

I am looking for Alumina Ceramics Rods manufacturer or wholesaler in US.
(not McMaster)
Those rods are used for knife sharpening.
I need 1/2 diam 8" long rods. Fine and medium grit.


Thanks,
Alex

  #2   Report Post  
Andy Dingley
 
Posts: n/a
Default Looking for Alumina Ceramics Rods manufacturer.

On Mon, 10 Nov 2003 22:35:43 GMT, alexkuzn
wrote:

I am looking for Alumina Ceramics Rods manufacturer or wholesaler in US.
(not McMaster)
Those rods are used for knife sharpening.


Try Lee Valley. They do a knife sharpener kit with a couple of rods
in it, about that size.

--
Die Gotterspammerung - Junkmail of the Gods
  #3   Report Post  
tomcas
 
Posts: n/a
Default Looking for Alumina Ceramics Rods manufacturer.

I'm not sure if you are looking for machinable rods or abrasive rods but
Mcmaster has both.
Abrasive-
http://www.mcmaster.com/asp/loadpage...arpening+Stone

Machinable-
http://www.mcmaster.com/param/asp/de...cat e+Ceramic
"alexkuzn" wrote in message
.com...
I am looking for Alumina Ceramics Rods manufacturer or wholesaler in US.
(not McMaster)
Those rods are used for knife sharpening.
I need 1/2 diam 8" long rods. Fine and medium grit.


Thanks,
Alex



  #4   Report Post  
David Billington
 
Posts: n/a
Default Looking for Alumina Ceramics Rods manufacturer.

Not entirely sure if these people will do what you want be they do a
variety of alumina products www.earthfirewater.com

alexkuzn wrote:

I am looking for Alumina Ceramics Rods manufacturer or wholesaler in
US. (not McMaster)
Those rods are used for knife sharpening.
I need 1/2 diam 8" long rods. Fine and medium grit.


Thanks,
Alex


  #5   Report Post  
David Billington
 
Posts: n/a
Default Wrong URL Looking for Alumina Ceramics Rods manufacturer.

Not entirely sure if these people will do what you want be they do a
variety of alumina products www.earthwaterfire.com

David Billington wrote:

Not entirely sure if these people will do what you want be they do a
variety of alumina products www.earthfirewater.com

alexkuzn wrote:

I am looking for Alumina Ceramics Rods manufacturer or wholesaler in
US. (not McMaster)
Those rods are used for knife sharpening.
I need 1/2 diam 8" long rods. Fine and medium grit.


Thanks,
Alex



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bowing house wall - tie rods? Grunff UK diy 113 October 19th 03 02:35 AM


All times are GMT +1. The time now is 08:40 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"