HYUNDAI ML-C3 lathe
 

Just brought one of these on ebay, and would like to buy a moving
steady and a fixed steady, but I can't find any company selling these
parts.

Does anyone kow where I could order these parts, or if anyone rebrands
this lathe in the UK

HYUNDAI ML-C3 lathe
 

Probably not that hard to make, or modify from another machine, as long as
one way is tracked/fitted more-or-less accurately, because the final fit is
"dialed in" anyway. You could even weld something up, as long as the way
part and the three rollers on the work are OK.
Of course, I ain't done this...

I've got a really well-set up Enco (no, not oxy-moronic!), w/ a
steady/follower; mebbe you could try one from them on your machine; I'm sure
they'd be able to give basic dimensions so you'd know what you'd have to
modify. Or Jet, mebbe Grizzly, etc. Or gasp g-d ebay....
----------------------------
Mr. P.V.'d
formerly Droll Troll
"Will" wrote in message
ups.com...
Just brought one of these on ebay, and would like to buy a moving
steady and a fixed steady, but I can't find any company selling these
parts.

Does anyone kow where I could order these parts, or if anyone rebrands
this lathe in the UK

HYUNDAI ML-C3 lathe
 

follow-up

The ML-C3 is sold in the UK by Machine Mart, branded by Clarke as the
C300

The Clarke lathe is just a diffrent colour, and doesn't include the RPM
gauge.

Also worthy of note is the electrics are in the box the auto advance
thread runs thru, and this should have a rubber grommet fitted, if it
doesn't then the water based cutting fluid gets into the box and is
turned into steam by the MOSFET cooling fins, then the steam settles on
everything electrical.

The Clarke version in the cataloghe looks like it is missing this
grommet as well (mine was loose in the electric box.

See http://www.stray-toaster.co.uk/midge...es/006602.html for
pictures