wrought iron gates
 

I had a steel (mild steel) security gate installed about 7 years ago and now
its turning into rust while the wrought iron gate on the same building
installed over 40 years ago has no rust whatsoever. From my understanding
its easy to work with and easy to weld. Wrought iron is great stuff but we
don't make it anymore in the US since 1900. Why is that? Could we still get
wrought iron and is it expensive like stainless steel?

wrought iron gates
 

AFAIK, the closest we have anymore is mild steel, which still has a
significant carbon content. I believe that wrought iron is almost pure
iron. I suppose you could purge the carbon from mild steel by reheating it
in an oxygen environment (make a miniature Bessemer furnace?), but I'm no
metalurgist.

--
Bob (Chief Pilot, White Knuckle Airways)


"Frank" wrote in message
...
I had a steel (mild steel) security gate installed about 7 years ago and
now its turning into rust while the wrought iron gate on the same building
installed over 40 years ago has no rust whatsoever. From my understanding
its easy to work with and easy to weld. Wrought iron is great stuff but we
don't make it anymore in the US since 1900. Why is that? Could we still get
wrought iron and is it expensive like stainless steel?

wrought iron gates
 

I'm not a metalurgist either but I know a bit about real wrought iron.

Wrought iron doesn't rust as badly as steel because of the silicate
slag that it contains. This helps it resist rusting. Carbon content
has little to do with it.

As far as I know wrought iron may have been made in the U.S. into the
1950's but not in large quantities. It's one of those technologies
that disapeared quickly after WWII.

In the U.K. there is a company called "The Real Wrought Iron Company"
there is good information on their website.

http://www.realwroughtiron.com/wiac.asp

Cheers,

Kelley

On Fri, 21 Oct 2005 11:57:00 -0400, "Bob Chilcoat"
wrote:

AFAIK, the closest we have anymore is mild steel, which still has a
significant carbon content. I believe that wrought iron is almost pure
iron. I suppose you could purge the carbon from mild steel by reheating it
in an oxygen environment (make a miniature Bessemer furnace?), but I'm no
metalurgist.