Which floor drill press for around $300?
Guys,
I am shopping for floor model drill press. My budget is $300 and I want a drill press with little or no vibration and little run out. Any recommendation is appreciated. Thanks |
Alex wrote:
I am shopping for floor model drill press. My budget is $300 and I want a drill press with little or no vibration and little run out. Any recommendation is appreciated. ROTFL Every cheap drill press vibrates. Some are better than others. I once owned a Jet 17MF, had less than .001" runout, ran pretty smooth after I monkeyed with it. To get a cheap DP to run smoothly you'll have to remove all the pulleys and true them on a lathe, then balance them. Then you'll have to tear down the motor and balance the armature. Those should get you a long ways. A lightly used Jet 17MF should cost you about $250. Check this out: http://www.tinyisland.com/htbdrillp.txt GWE |
"Alex" wrote in message ups.com... Guys, I am shopping for floor model drill press. My budget is $300 and I want a drill press with little or no vibration and little run out. Any recommendation is appreciated. Thanks http://www.mckeanmachinery.com/inven...?TheKey=BME810 |
All times are GMT +1. The time now is 02:46 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter