Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Rowe fractional gearmotors
I was going through my Stuff and found a case..case..of small
gearmotors. Marked ROWE 500 Series Made in Mexico No other info. solder tabs on the side for input voltage, shaft is about 1/8" No info I can find on the net. Shrug. Gear box is heavy casting, riveted shut. Motor body about 1 1/8" in diameter, gear box about 1.5 x1" x1". Total length from ass to end of shaft about 3", shaft about .75 long, with flat milled on the end. Anyone have any data? Anyone need em? Probably 20 in the case. Gunner "Pax Americana is a philosophy. Hardly an empire. Making sure other people play nice and dont kill each other (and us) off in job lots is hardly empire building, particularly when you give them self determination under "play nice" rules. Think of it as having your older brother knock the **** out of you for torturing the cat." Gunner |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for shop-made project plans using fractional horsepower motors | Woodworking |