Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Roy
 
Posts: n/a
Default OT - Old Tractors Free!

Yep, just make sure that your brother has the coffee pot on and
sufficient donuts on hand as he will propbably be swamped with folks.

I ran into a fellow last week that had a Ford 450 towing a large
goosneck trailer that was packed full of the older models of the Cub
CAdets and various implements made for them. He collects them, and
refurbs them or strips them for parts. He is retired and goes all over
the NOrth American continent looking for old Cub CAdets lawn and
garden tractors, and the occasional hit and miss engines laying around
that folks have no idea on their worth, and are glad to just have this
fellow take the trash away for them.........


On Tue, 30 Sep 2003 22:52:35 -0700, Roy
wrote:

x-Post over at
x-http://www.antiquetractors.com/
x-they will love you.
x-
x-
x-Lane wrote:
x- Yup, free!
x- My brother is going to haul these off if he can't find someone who will take
x- them of his hands. They are located in Granite Falls, WA and must be picked
x- up. No shipping!
x-
x- #1
x- 1935 Farmall F-12
x- It is a rolling frame, two engines come with it, take the two engines to
x- make one good running one. One has a cracked block, the other has a knocking
x- rod.
x-
x- #2
x- 1942-43 International I-4 (Commercial version of the W-4) Has USNavy
x- insignia on serial plate.
x- Engine is in the frame but has a cracked block, head is off. Basically needs
x- an engine, current one has been sitting apart and is probably rusted/seized
x- up.
x-
x- If anyone is interested you can contact me and I will give you my brothers
x- email address.
x-
x- Lane
x-
x-
x-


--
Visit my website: Remove nospam for correct address
http://www.nospamfrugalmachinist.com

Contents: foundry and general metal working and lots of related projects.
Regards
Roy aka Chipmaker // Foxeye
Opinions are strictly those of my wife....I have had no input whatsoever.
Remove nospam from email address
  #2   Report Post  
Lane
 
Posts: n/a
Default OT - Old Tractors Free!

Already done.


"Roy" wrote in message
...
Post over at
http://www.antiquetractors.com/
they will love you.


Lane wrote:
Yup, free!
My brother is going to haul these off if he can't find someone who will

take
them of his hands. They are located in Granite Falls, WA and must be

picked
up. No shipping!

#1
1935 Farmall F-12
It is a rolling frame, two engines come with it, take the two engines to
make one good running one. One has a cracked block, the other has a

knocking
rod.

#2
1942-43 International I-4 (Commercial version of the W-4) Has USNavy
insignia on serial plate.
Engine is in the frame but has a cracked block, head is off. Basically

needs
an engine, current one has been sitting apart and is probably

rusted/seized
up.

If anyone is interested you can contact me and I will give you my

brothers
email address.

Lane






Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AEG frost free freezer freezes up The General UK diy 6 December 18th 05 02:47 PM
Lead free fittings Pete Cross UK diy 8 October 28th 03 10:28 AM


All times are GMT +1. The time now is 09:58 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"