Need resistor value for Hobart TR250-HF foot pedal
 

Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.

Need resistor value for Hobart TR250-HF foot pedal
 

In article , mawdeeb
wrote:

Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.


I can check one of the ones at school.

Need resistor value for Hobart TR250-HF foot pedal
 

In article , mawdeeb
wrote:

Ernie Leimkuhler wrote:
In article , mawdeeb
wrote:


Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.



I can check one of the ones at school.

Greetings, server has been down for a while. Trying to catch up.

Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way



DOH!!!
OK I have to head over there tomorrow.
I swear I will check one.

Need resistor value for Hobart TR250-HF foot pedal
 

Ernie Leimkuhler wrote:
In article , mawdeeb
wrote:


Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.



I can check one of the ones at school.

Greetings, server has been down for a while. Trying to catch up.

Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way

Jim Vrzal
Holiday,Fl.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Need resistor value for Hobart TR250-HF foot pedal
 

In article , Ernie Leimkuhler
wrote:

In article , mawdeeb
wrote:

Ernie Leimkuhler wrote:
In article , mawdeeb
wrote:


Greetings Netizens, anyone know off hand what the value of the foot
pedal resistor might be?.

Or if an owner of a Hobart TR250-HF Tig welder would be so kind as to
look or measure the value of the foot pedal resistor for your machine
and report back, I would be very greatful. I already checked the owners
manual, no dice.

Found out what was causing my machine to trip breakers on start up.
(previous owner rewired amp select switch thru a shorted reactor coil).
Drew alot of current to get a weld going. With the short removed the
unit now fires up and only draws 10 amps idling. Even the high freq
works now. Hu rah.

Thanks in advance

Jim Vrzal
Holiday,FL.



I can check one of the ones at school.

Greetings, server has been down for a while. Trying to catch up.

Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way



DOH!!!
OK I have to head over there tomorrow.
I swear I will check one.


27 Kohm is what I measured ours to be.

Need resistor value for Hobart TR250-HF foot pedal
 

In article , mawdeeb
wrote:

Thank you so much. Local dealer was insisting it was a 10Kohm.

10Kohm is for Cybertigs and later machines.



If your
school can use a copy of this owners manual and schematic, I'd like to
donate one. Send me a snail mail address of the dept and I'll drop one
in the mail.

Again, thanks for taking the time to look

Jim Vrzal
Holiday, FL.


We have the full paperwork for ours, not that it matters.
It is stored in an outside container as an emergency backup machine.
Thanks anyway.




Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way



DOH!!!
OK I have to head over there tomorrow.
I swear I will check one.



27 Kohm is what I measured ours to be.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Need resistor value for Hobart TR250-HF foot pedal
 

Thank you so much. Local dealer was insisting it was a 10Kohm. If your
school can use a copy of this owners manual and schematic, I'd like to
donate one. Send me a snail mail address of the dept and I'll drop one
in the mail.

Again, thanks for taking the time to look

Jim Vrzal
Holiday, FL.

Call out to Ernie - Your probably busier than a one-armed paper hanger,
but did you have an opportunity to check the resistor value on the
Hobart foot pedal at your school?

Thanks either way



DOH!!!
OK I have to head over there tomorrow.
I swear I will check one.



27 Kohm is what I measured ours to be.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----