Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Devlieg Microbore style cartridges
I'm looking for brazed carbide cartridges like go in a Devlieg Microbore
boring head. MSC has some insert style, but not the brazed carbide style. Nothing in J&L. I went all through the Devlieg web site - no prices anywhere and you have to contact a distributor. Smells like super high prices. Anyone seen a good source for these? Karl |
#2
|
|||
|
|||
Devlieg Microbore style cartridges
In article ydOab.10448$BS5.7658
@newsread4.news.pas.earthlink.net, says... I'm looking for brazed carbide cartridges like go in a Devlieg Microbore boring head. MSC has some insert style, but not the brazed carbide style. Nothing in J&L. I went all through the Devlieg web site - no prices anywhere and you have to contact a distributor. Smells like super high prices. Anyone seen a good source for these? What size, Karl? I think I've got a few, as well as a bunch that take CCMT inserts. Ned Simmons |
#3
|
|||
|
|||
Devlieg Microbore style cartridges
What size, Karl? I think I've got a few, as well as a bunch
that take CCMT inserts. I need several sizes. I have about twenty Devlieg heads - courtesy of Ebay - that need cartridges. You want to sell your whole bunch? P.S. Right now my email is ruined - 100s of spams per day. Karl |
#4
|
|||
|
|||
Devlieg Microbore style cartridges
"Karl Townsend" wrote in message .net...
What size, Karl? I think I've got a few, as well as a bunch that take CCMT inserts. I need several sizes. I have about twenty Devlieg heads - courtesy of Ebay - that need cartridges. You want to sell your whole bunch? P.S. Right now my email is ruined - 100s of spams per day. Karl Keep looking on ebay, the aero surplus places. Take note for the same size you have choices of rake angle et. al. they are not all the same. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Microbore CH better than 15mm - says plumber | UK diy | |||
Removing Old Microbore Radiator | UK diy | |||
Towel Radiator with Microbore | UK diy |