Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Car Stands from wood?
I have a small (=light) car that will need a lot of work done. It would be
easier if it was off the ground by more than the height those car stands you get at the auto stores can do. So I'm thinking of making some stands from wood, and jacking it up in stages onto them. Has anyone done this, and are there any pitfalls (a particularly appropriate term) of which I should be aware? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
### micro-FAQ on wood # 039 | Woodworking | |||
### micro-FAQ on wood # 038 | Woodworking | |||
### micro-FAQ on wood # 036 | Woodworking | |||
### micro-FAQ on wood # 020 | Woodworking | |||
### micro-FAQ on wood # 010 | Woodworking |