 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Air Cylinder Help Needed
I managed to come up with what I thought would be a good air cylinder to
mount on my 4x6 import horizontal saw to replace the spring. It is a Norgen N76025/125. Which I cannot find any documentation on. I think this is all metric, as the 125 is the approximate stroke length in mm and the bore is probably the 25. The problem lies in the ports. They are about the same as 1/8 NPT, but the thread pitch is much finer and they are not tapered. Any ideas what I am looking at here? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Unusual propane cylinder and "valve" | Metalworking | |||
| Moving a Hot Water Cylinder & Cold Water Tank | UK diy | |||
| Hot water cylinder | UK diy | |||
| Ancient HW Cylinder - replacement | UK diy | |||
| unvented H/w cylinder | UK diy | |||
Threaded Mode
