 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
clamping kit for Big Red Mill/Drill
Hi, Guys!
I've managed to get along without a clamping kit for my Big Red Mill/Drill ( HF 42976) for some time now, but it's time to bite the bullet.. I've seen comments about this Mill/Drill and am checking Ebay for kits... A bit confusing, to say the least. The upper slots in my table are .490" wide, or about 12.49mm and the lower slot very close to .625".... 3/8" kits are available on Ebay, but mention half inch slots... Will the kit on ebay (for example, http://tinyurl.com/7b9n2 or http://tinyurl.com/bp637 do the trick? TIA Bill |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Variable speed motor for my 110V mill/drill? | Metalworking | |||
| Variable speed motor for my 110V mill/drill? | Metalworking | |||
| Clamping presure | Woodturning | |||
| DRO System Mill/Drill | Metalworking | |||
| Gripmaster Portable Clamping System | Woodworking | |||
Threaded Mode
