Industrial Gear oil ?
 

I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear oil
( atleast thats what the label says ).. Its smelly and brownish, so I doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )

Or do I just burn it ?

/peter

Q wrote:
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear oil
( atleast thats what the label says ).. Its smelly and brownish, so I doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )

Or do I just burn it ?

Don't burn it! Oil is always useful. I don't know the specification of
this particular oil, but equivalent tables are available. You could try
searching for the name of this oil online. Use it to fill you oil can,
if nothing else. And if you really do need to get rid of it, take it to
a recycling place...burning it will make a real stink!

Chris

"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear oil
( atleast thats what the label says ).. Its smelly and brownish, so I
doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I
use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It
has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )


Don't you just love it when people get something free or cheap and then
decide to risk wasting or destroying hundreds or thousands of dollars of
labor or machinery (in this case, a transmission) just so they can find a
use for their "bargain"?

Sure, go ahead and ignore your vehicle's service specifications (both
service intervals and oil specifications). It's quite clear you know more
than the collective engineering expertise of Toyota Corporation.


Or do I just burn it ?

Now there's another great idea. It's makes much more sense to fill our air
with billowing clouds of toxic black smoke than to give the oil to someone
who can actually use it or to recycle it.

"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear
oil
( atleast thats what the label says ).. Its smelly and brownish, so I
doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I
use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It
has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )


Don't you just love it when people get something free or cheap and then
decide to risk wasting or destroying hundreds or thousands of dollars of
labor or machinery (in this case, a transmission) just so they can find a
use for their "bargain"?

Sure, go ahead and ignore your vehicle's service specifications (both
service intervals and oil specifications). It's quite clear you know more
than the collective engineering expertise of Toyota Corporation.


Or do I just burn it ?

Now there's another great idea. It's makes much more sense to fill our air
with billowing clouds of toxic black smoke than to give the oil to someone
who can actually use it or to recycle it.



http://www.fammllc.com/famm/lubrican...ils&&Meropa220

===

MEROPA lubricants are recommended for all heavy duty enclosed gear drives
containing spur gears, helical gears, and bevel gears as well as spiral
bevel gears, hypoid gears, and worm gears, including those operating at high
speeds or very high loads. MEROPA lubricants can also be used for chain
drives, sprockets, plain and anti-friction bearings, guide ways and flexible
couplings where service conditions require the use of either a mild EP or an
EP-type gear lubricant. MEROPA lubricants have been formulated to meet the
most severe service requirements of gear drive manufacturers. MEROPA 68 to
320 meet the US steel 224 specification and the 68 to 680 grades meet the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.

--

SVL

"PrecisionMachinisT" wrote in message
...

"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear
oil
MEROPA 68 to
320 meet the US steel 224 specification and the 68 to 680 grades meet the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.


The viscosity of ISO 220 is equivalent to SAE 50 engine oil or 90 weight
gear oil.

On Sun, 19 Jun 2005 22:17:14 -0700, "PrecisionMachinisT"
wrote:


"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear
oil
( atleast thats what the label says ).. Its smelly and brownish, so I
doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I
use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It
has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )


Don't you just love it when people get something free or cheap and then
decide to risk wasting or destroying hundreds or thousands of dollars of
labor or machinery (in this case, a transmission) just so they can find a
use for their "bargain"?

Sure, go ahead and ignore your vehicle's service specifications (both
service intervals and oil specifications). It's quite clear you know more
than the collective engineering expertise of Toyota Corporation.


Or do I just burn it ?

Now there's another great idea. It's makes much more sense to fill our air
with billowing clouds of toxic black smoke than to give the oil to someone
who can actually use it or to recycle it.



http://www.fammllc.com/famm/lubrican...ils&&Meropa220

===

MEROPA lubricants are recommended for all heavy duty enclosed gear drives
containing spur gears, helical gears, and bevel gears as well as spiral
bevel gears, hypoid gears, and worm gears, including those operating at high
speeds or very high loads. MEROPA lubricants can also be used for chain
drives, sprockets, plain and anti-friction bearings, guide ways and flexible
couplings where service conditions require the use of either a mild EP or an
EP-type gear lubricant. MEROPA lubricants have been formulated to meet the
most severe service requirements of gear drive manufacturers. MEROPA 68 to
320 meet the US steel 224 specification and the 68 to 680 grades meet the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.


Notice "guide ways"? likely make a good way lube too.

Gunner

"Considering the events of recent years,
the world has a long way to go to regain
its credibility and reputation with the US."
unknown

"bw" wrote in message
...

"PrecisionMachinisT" wrote in message
...

"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial
gear
oil
MEROPA 68 to
320 meet the US steel 224 specification and the 68 to 680 grades meet
the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and
AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.


The viscosity of ISO 220 is equivalent to SAE 50 engine oil or 90 weight
gear oil.




Sae 50 motor oil and a 90 gear oil are two diferent aminals
altogether.....still...

Perhaps too thin for a Bar Oil then...

--

SVL

"Gunner" wrote in message
...
On Sun, 19 Jun 2005 22:17:14 -0700, "PrecisionMachinisT"
wrote:


"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial
gear
oil
( atleast thats what the label says ).. Its smelly and brownish, so I
doubt
SWMBO would appreciate me using it on the door hinges etc, so what do
I
use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?..
It
has
run about 160.000 miles w. the same oil in it ( I change the oil on
the
engine on a regular basis, but not on the gear box )


Don't you just love it when people get something free or cheap and then
decide to risk wasting or destroying hundreds or thousands of dollars
of
labor or machinery (in this case, a transmission) just so they can find
a
use for their "bargain"?

Sure, go ahead and ignore your vehicle's service specifications (both
service intervals and oil specifications). It's quite clear you know
more
than the collective engineering expertise of Toyota Corporation.


Or do I just burn it ?

Now there's another great idea. It's makes much more sense to fill our
air
with billowing clouds of toxic black smoke than to give the oil to
someone
who can actually use it or to recycle it.



http://www.fammllc.com/famm/lubrican...ils&&Meropa220

===

MEROPA lubricants are recommended for all heavy duty enclosed gear
drives
containing spur gears, helical gears, and bevel gears as well as spiral
bevel gears, hypoid gears, and worm gears, including those operating at
high
speeds or very high loads. MEROPA lubricants can also be used for chain
drives, sprockets, plain and anti-friction bearings, guide ways and
flexible
couplings where service conditions require the use of either a mild EP or
an
EP-type gear lubricant. MEROPA lubricants have been formulated to meet
the
most severe service requirements of gear drive manufacturers. MEROPA 68
to
320 meet the US steel 224 specification and the 68 to 680 grades meet the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and
AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.


Notice "guide ways"? likely make a good way lube too.


If its clean, then add it a quart or per every couple gallons into one of
your your diesel engines.

Its being a hydrocarbon fuel at the very least.

--

SVL

"PrecisionMachinisT" skrev i en meddelelse
...



Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.

The chainsaw bar oil recommended by Husquarna ( brand of chainsaw I own ) is
way thicker than this gear oil... the the bar oil is biodegradable..

Notice "guide ways"? likely make a good way lube too.


If its clean, then add it a quart or per every couple gallons into one of
your your diesel engines.

Its being a hydrocarbon fuel at the very least.

Seems its going to end up as general purpose, smelly oil here.. was just
wondering if there was a better use for it.. Someone might have said:
Ooooh... this stuff is perfect in your gearbox :-)

thanks for the input

I'd be happy to share the oil with you, but shipping it from Denmark might
make it less attractive :-)

/peter

--

SVL

"Q" wrote in message
...

"PrecisionMachinisT" skrev i en
meddelelse
...



Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.

The chainsaw bar oil recommended by Husquarna ( brand of chainsaw I own )
is
way thicker than this gear oil... the the bar oil is biodegradable..

Notice "guide ways"? likely make a good way lube too.


If its clean, then add it a quart or per every couple gallons into one
of
your your diesel engines.

Its being a hydrocarbon fuel at the very least.

Seems its going to end up as general purpose, smelly oil here.. was just
wondering if there was a better use for it.. Someone might have said:
Ooooh... this stuff is perfect in your gearbox :-)

thanks for the input

I'd be happy to share the oil with you, but shipping it from Denmark might
make it less attractive :-)




There most likely is some ISO designation on that oil you have that would
verify interchangability if you were to look online hard enough for it.

Oh, and I just use the way oil that gets skimmed outa the coolant tanks for
chainsaw bar oil anymore--whatever is left I give to my neighbor.....he has
a waste-oil furnace that he uses to heat his shop.

--

SVL

On Mon, 20 Jun 2005 00:49:46 -0700, PrecisionMachinisT wrote:

Sae 50 motor oil and a 90 gear oil are two diferent aminals
altogether.....still...

Perhaps too thin for a Bar Oil then...

The jug of SuperTech (Walmart brand) bar oil I have says it's SAE 30
weight. It's not all that viscous, but it's very tacky. My father-in-law
buys gear oil for his chainsaw. I dunno why, it costs more than bar oil,
doesn't "stick" as well, and it smells worse.

--
Ron DeBlock N2JSO
If God had meant for Man to see the sunrise,
He would have scheduled it later in the day.

In article ,
Ron DeBlock wrote:

On Mon, 20 Jun 2005 00:49:46 -0700, PrecisionMachinisT wrote:

Sae 50 motor oil and a 90 gear oil are two diferent aminals
altogether.....still...

Perhaps too thin for a Bar Oil then...

The jug of SuperTech (Walmart brand) bar oil I have says it's SAE 30
weight. It's not all that viscous, but it's very tacky. My father-in-law
buys gear oil for his chainsaw. I dunno why, it costs more than bar oil,
doesn't "stick" as well, and it smells worse.

Does he go through a bunch of chains, too? The bar oil actually
stays in long enough to lube the pins, but anything else generally gets
flungeded out before it can get into the pins, so they run a bit dry and
develop "chain stretch." Even gear oil--I've tried. And it did make a
hellish, stinky mess.

--
B.B. --I am not a goat! thegoat4 at airmail dot net
http://web2.airmail.net/thegoat4/