Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Kurt vise FA on eBay
http://cgi.ebay.com/ws/eBayISAPI.dll...2039&category=
12584 Hard to tell from the bad pic, but I would assume this is a decent deal. Until you read the fine print about the shipping charges. Rick, who is sure this has to be a typo... |
#2
|
|||
|
|||
Kurt vise FA on eBay
$3600 does seem rather excessive, doesn't it.
-- Steve Worcester www.turningwood.com Better Woodturning through Technology (And a hell of alotta practice) "Rick Chamberlain" wrote in message ... http://cgi.ebay.com/ws/eBayISAPI.dll...2039&category= 12584 Hard to tell from the bad pic, but I would assume this is a decent deal. Until you read the fine print about the shipping charges. Rick, who is sure this has to be a typo... |
#3
|
|||
|
|||
Kurt vise FA on eBay
Gee. Thanks for the warning. I was about to send him $3600.00 for
shipping. Bob Swinney "Rick Chamberlain" wrote in message ... http://cgi.ebay.com/ws/eBayISAPI.dll...2039&category= 12584 Hard to tell from the bad pic, but I would assume this is a decent deal. Until you read the fine print about the shipping charges. Rick, who is sure this has to be a typo... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Furniture design vintage carpentry | UK diy | |||
bought a chuck on ebay from marjenmachine | Metalworking | |||
OT - Lightweight Ebay shipping fee scam | Metalworking |