I need Tungsten Carbide blank
 

I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?



Regards
Kori

I need Tungsten Carbide blank
 

In article , "Kori" says...

I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can size
it down)

If you want round carbide drill blanks, then MSC corp has them.

Your post was a bit unclear about the exact geometry of the
desired item.

Jim

==================================================
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
==================================================

I need Tungsten Carbide blank
 

In article ,
says...
Try MSC industrial supply:
http://www.mscdirect.com
search for carbide rod 15/64 Diameter (.2344")


Or McMaster p/n 8791A23 -- 6 x 50mm (.236 x 1.96 in) --
$5.38

http://www.mcmaster.com/

Ned Simmons

I need Tungsten Carbide blank
 

Hey Kori, I have a box of Kennametal solid carbide rods at home, I think
they are 1/4" by about 3" long. You can have some for the price of shipping.

Todd L
Phoenix

"Kori" wrote in message
...
I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't
know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?



Regards
Kori

I need Tungsten Carbide blank
 

Thank you for the information. I well order a few and see if they work as
well as the tungsten carbide bits I have.

Regards
Kori


"Wayne Harris" wrote in message
...
Try MSC industrial supply:
http://www.mscdirect.com
search for carbide rod 15/64 Diameter (.2344")

I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can
size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't
know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?

Regards
Kori

I need Tungsten Carbide blank
 

"Todd L" wrote in message
...
Hey Kori, I have a box of Kennametal solid carbide rods at home, I think
they are 1/4" by about 3" long. You can have some for the price of
shipping.

Todd L
Phoenix

"Kori" wrote in message
...
I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can
size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't
know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?



Regards
Kori

I need Tungsten Carbide blank
 

Sounds good to me. Email me at and tell me shipping
cost and where to send payment. Put Tungsten Carbide in Subject line, so I
don't delete accidently with junk mail.


Regards
Kori



"Todd L" wrote in message
...
Hey Kori, I have a box of Kennametal solid carbide rods at home, I think
they are 1/4" by about 3" long. You can have some for the price of
shipping.

Todd L
Phoenix

"Kori" wrote in message
...
I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can
size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't
know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?



Regards
Kori

I need Tungsten Carbide blank
 

What is the difference between the a rod blank listed as carbide and one
listed tungsten carbide? Do this both have tungsten, are they the same in
hardness?

Kori

"Kori" wrote in message
...
I want to make a custom tungsten carbide cutting tool for one of my wood
working machines (I have a diamond cutting tool for the job.). I need a
tungsten carbide blank rod that is .235" in width. (or near it. I can size
it down)

My problem is, I can't seem to find a dealer that sells tungsten carbide
blank rods in small quanities. I only need a few.

I did find a dealer that sold carbide rods that might work, but I don't
know
if it's the same thing as a tungsten carbide rod.

Any suggests on a dealer that would sell me a few blank rods?



Regards
Kori

I need Tungsten Carbide blank
 

Thanks for the information. I will order a few of these also just to have
extras.

Regards
Kori

"Ned Simmons" wrote in message
...
In article ,
says...
Try MSC industrial supply:
http://www.mscdirect.com
search for carbide rod 15/64 Diameter (.2344")


Or McMaster p/n 8791A23 -- 6 x 50mm (.236 x 1.96 in) --
$5.38

http://www.mcmaster.com/

Ned Simmons