bolt question
I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal
(9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
Might try http://www.boltdepot.com/ You might have to mill the head to
size. "habbi" wrote in message ... I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal (9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
I think that you are describing automotive header bolts. They are used to
affix tubular headers to engines and have a 7/16" head and a flange. I'm not sure about stainless but they have chrome. http://www.jegs.com/cgi-bin/ncommerc...cgrfnbr=162371 These should be available at any auto parts store. lg no neat sig line "habbi" wrote in message ... I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal (9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
that sounds like the bolt that holds the trim tab on a OMC outboard, they
are more than 1/2 long but that can be taken care of with a dremel and a cut off wheel. how many do you need? "habbi" wrote in message ... I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal (9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
Habbi,
I use these folks all the time. They will have your item in 12 point and 6 point. http://www.alloyboltz.com/cgi-bin/alzstore.cgi Steve "habbi" wrote in message ... I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal (9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
I will look at them. I am going to make a gearcase drain plug that is not
prone to stripping. The one in my 250 Johnson has a 5/32" allen head. "Waynemak" wrote in message ... that sounds like the bolt that holds the trim tab on a OMC outboard, they are more than 1/2 long but that can be taken care of with a dremel and a cut off wheel. how many do you need? "habbi" wrote in message ... I am looking for a 3/8"-16 bolt about 1/2" long with a smaller than normal (9/16") head. I think they are called flange head or something like that. Also it has to be stainless. I check mcmaster but can't find one. Thanks |
All times are GMT +1. The time now is 06:01 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter