Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Daewoo puma 250L
Does anyone know if there is a M Code for lathe to connect the tail
stop to the turret to position it. Thanks RG |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Potterton Puma 80 Pilot light always goes out - already changed the thermocouple | UK diy | |||
potterton 80 puma ch not working | UK diy | |||
Potterton Puma 80 - no hot water - again | UK diy | |||
Potterton Puma 80 Combi | UK diy |