Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Karl Shoemaker
 
Posts: n/a
Default 35 amp transformer wanted

I build 10-11 volt power supplies for my repeater's transmitters. Since
they pull
around 20-25 amps I've been using 35 amp/12v rated transformers and
pulling
a few windings off to get 10 volts AC. The vender (Hosfelt) ran out of
these and I'd like to get at least one more. The part numbers and other
lables on the transformer a
430-7001-4, EIA 6-9534, CLASS 180 H1 MEXICO. They are about 4 1/2" x
4", etc. Searcing on the web did not bring any current items to me. If
you
have any leads please email me or visit my site
http://www.dalek.org/srg
Thanks !!
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AC burns transformer Scott Home Ownership 5 March 16th 05 10:49 PM
Correction-Sony KV-1952RS TV Smoke/Flyback Transformer Novice Question Marc Electronics Repair 3 October 13th 04 05:20 PM
Transformer question Asimov Electronics Repair 5 September 26th 04 10:51 PM
12 volt lighting transformer tips Paul Furman Home Repair 8 December 8th 03 09:56 PM
Transformer is Buzzing - barry martin Home Repair 1 October 31st 03 09:56 AM


All times are GMT +1. The time now is 09:56 PM.

Powered by vBulletin® Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"